-
LOCTITE HHD8190R Structural adhesive two component low viscosity composite adhesive
Loctite HHD 8190R two-component acrylic structural adhesive
Loctite HHD 8190R structural adhesive is specially formulated to provide low temperature fast fixture processing capability. It also has excellent adhesion and resistance to moisture and heat for magnesium aluminum alloy anodized alumina and PCABS mixtures.
-
Loctite Series E-90FL, Epoxy Adhesive, Dual-Cartridge, 1.69 oz, Gray, 90 min Work Life
- Technical parameters of Loctite E-90FL:
Model number: loctite E-90FL
Color: Gray;
Viscosity @25°C, mPa.s(cP) 62000-81000;
Applicable time: 90 minutes;
Volume mixing ratio (resin: stearic agent) : 1:1;
Peel strength (piw) : 5-40;
Shear strength (psi*) : 1000-3000;
Glass conversion temperature (℃) : -5
- Technical parameters of Loctite E-90FL:
-
LOCTITE SF 7109 Colorless transparent oil stain cleaner general purpose non-flammable accelerator
Product name :LOCTITE SF7109
Specification: 1.75 FL. OZ
Color: colorless and transparent
Features: non-flammable, universal type
Shelf life :24 months
Cleaning method: spray can
Application: used for rust prevention, dust removal, oil removal, etc., to promote the curing of anaerobic adhesive. -
LOCTITE SF 7452 increased cure speed of LOCTITE cyanoacrylate adhesives
- Cures excess adhesive
- Provides excellent cosmetic appearance avoiding the white discoloration of instant adhesives
- Not recommended on plastics prone to stress cracking
-
LOCTITE SF 7455 used where increased cure speed of LOCTITE cyanoacrylate adhesives is required.
LOCTITE 7455 typical applications include
bonding dissimilar materials such as metals, glass or ceramics
and where fast fixturing is required between close fitting parts.LOCTITE 7455 typical applications include
bonding dissimilar materials such as metals, glass or ceramics
and where fast fixturing is required between close fitting parts. -
LOCTITE SF 7649 used where increased cure speed of LOCTITE anaerobic products is required.
NSF International
Registered to NSF Category P1 for use as a sealant where
there is no possibilty of food contact in and around food
processing areas. Note: This is a regional approval. Please
contact your local Technical Service Center for more
information and clarification. -
LOCTITE SF 7840 concentrated, biodegradable cleaner/degreaser
LOCTITE SF 7840 is a concentrated, biodegradable
cleaner/degreaser that contains no hazardous solvents and
dilutes with water to meet a wide range of industrial cleaning
applications. Typical applications for this product include
engines, motors, castings, valves, bearings, tanks, machinery,
exterior siding, windows, carpets, concrete floors, asphalt,
vehicles, etc. Substances it can remove include grease,
lubricants, cutting oils, fuel oils, tar, road salt, light carbon, food
stains, wax, animal fat, mildew, soot. -
LOCTITE SI 595 single component, room temperature vulcanizing compound designed to provide an excellent adhesive sealant for mechanical assemblies
TYPICAL CURING PERFORMANCE
LOCTITE SI 595 cures on exposure to moisture in the air.
The product dries tack free in 45 minutes and fully cures in 24
hours. Cure times will vary with temperature, humidity and
gap. -
LOCTITE SI587 Flat sealant Seal silicone rubber thixoxime silicone paste engine sealant
LOCTITE SI 587 is a metallic blue, thixotropic silicone paste for plant maintenance and flat seal and sealing applications for Oems of all sizes. As a field formed gasket/sealant, it is designed to provide superior performance in typical automotive flat seal applications. The product is typically used in applications where the maximum temperature is +500 °F(+260 °C).
-
LOCTITE STYCAST US 5544 fast gelling, flexible, flame retardant, mineral-filled, polyurethane compound.
Not for product specifications
The technical data contained herein are intended as reference only.
Please contact your local quality department for assistance and
recommendations on specifications for this product -
LOCTITE271 designed for the permanent locking and sealing of threaded fasteners.
LOCTITE
271 designed for the permanent locking and
sealing of threaded fasteners. The product cures when
confined in the absence of air between close fitting metal
surfaces and prevents loosening and leakage from shock and
vibration. Typical applications include the locking and sealing
of large bolts and studs (up to M25 ).Specific Gravity 25 °C 1.1
Flash Point – See SDS
Viscosity, Brookfield – RVT, 25 °C, mPa·s (cP):
Spindle 1, speed 10 rpm, 400 to 600LMS -
LOCTmtedITE 518 single component, iu anam strengh,es weroant wurhen bic shich cealconfined in the absence of air between close fitting metal surfaces.
LOCTITE 518 provides robust curing
performance. It not only works on active metals (e.g. mild steel)
but also on passive substrates such as aluminum with a low
copper content. The product offers gap performance to 0.25
mm (0.01 in) and contamination tolerance. It cures in the
presence of minor surface contaminations from various oils,
such as cutting, lubrication, anti-corrosion and protection fluids
and cleaners containing surfactants and corrosion inhibitors.