other

  • sankol CFD 960 Quick dry lubricant

    Applicable to CD-ROM, DVD-ROM and other audio equipment movement, audio and video products, office equipment. Non-toxic, clean, no fungi and no adverse effects on plastic parts, these are the basic requirements of the toy industry.

  • Sankol CFD-006Z Dry lubricant

    Features:
    1. After the formation of non-sticky volatile dry film, no oil stains, do not pollute the product;
    2. Increase the parts of the finish, anti-static, dust, protective parts clean;
        3. Environmental protection without harmful substances, the use of safety, drainage, moisture, metal protection is not corrosion;
    4. High and low temperature performance, wide temperature range, uniform film thickness, short drying time;
    5. Protection of all plastic and rubber surfaces, with metal, plastic and elastomer compatibility is good.

  • Sankol CFD-5005Z Quick-drying lubricants for precision parts

    Non-toxic, clean, no fungi and no adverse effects on plastic parts, these are the basic requirements of the toy industry. SANKOL quick-drying lubricants not only meet the above requirements, the price is cheaper than synthetic oil and silicone oil.

  • ShinEtsu G-501 Silicone Grease

    Shin-Etsu G-501 grease by special silicone oil as a base oil, add the special wear-resistant, anti-oxidation additives refined, it applies to plastic parts, blower bearings, lubrication and silencers. The ratio between the lubricated components (such as: Polyacetal POM, polycarbonate PC, ABS and other resins) will not form cracks. Shin-Etsu G-501 grease lubrication between metal far more than the general lubricating effect of the silicone oil.

  • ShinEtsu KR-400 liquid silicone Coating agent

    Due to the degree of aging caused by ultraviolet light, good weather resistance. Coating yellow, powder, luster disappeared and so on, can be a long time to maintain the stability of the coating characteristics.

  • ShinEtsu KR-400 Organic Silicone

    product characteristics
    The KR-400 silicone resin is a demethoxylated methyl type silicone coating agent containing a curing catalyst. At room temperature, about 1 hour can be dry, can be cured for several hours, with excellent weather resistance, rust, water, water, adhesion, chemical resistance
    Character, heat resistance, the formation of relatively hard surface film.

  • Sony SC 901

    SONY SC901 is a self extinguishing glue adhesive of high performance non corrosion speed dry. When hardening, it has little odor, and it has excellent electrical characteristics and weather resistance after hardening. Suitable for electronic, electrical sealing, stationary, shock proof, thermal conduction.
    Temperature resistance: -50°C~250°c

  • SONY SC-121 glue

    SC121 is the neoprene as main ingredients, has passed the UL specifications (94 v – 0) certification of high-performance self-extinguishing adhesives. To room temperature, heating contact type, as long as the tiny pressure, can play a strong cohesive force.

  • SONY white glue adhesive sealant SC608Z2

    Welding machine, electronic parts with a series of adhesive with excellent electrical characteristics and bonding force, can be widely meet the various needs. Flame retardant UL94V-Q for power suppliers, monitors and other electronic components such as insulation seal, shock fixed.Polyester type adhesive (SC608) The main component of this adhesive is polyester resin.

  • SONY white glue adhesive sealant SC608Z2

    An excellent electrical insulator.
    Highly viscous and thixotropic, the product can be easily applied to a vertical surface without threading that may lead to an untidy appearance.
    SC608LVZ2 is identical to SC608Z2 except for a lower viscosity.

  • Struers AP-A Suspensions and Powders are based on ultra pure aluminium oxides (alumina). They are available in two forms, deagglomerated and agglomerated.

    Alumina powders
    Alumina powders consist of uniform particles with a narrow particle size distribution. The powders can
    easily be mixed with distilled water

    Applications Areas
    AP Suspension and Powder can be used for a wide range of materials:
    • Semiconductors
    • Steel
    • Aluminium
    • Copper and Copper alloys
    • Coatings
    • Nickel-base alloys
    • Cobalt-base alloys
    • Plastic

  • SX720B epoxy resin

    Pressure-sensitive range is reached in this curing process about 10 min. after application. If adherends are put together during this time, they bound instantaneously as in the case of rubber contact adhesive, eliminating the need for temporary fixation.