pattex px4l2
Scope of application:
It is suitable for bonding wood, metal, rubber, leather, textile and other materials; especially adhesive plywood, fiberboard, particleboard, blockboard, decorative composite board (fire board), decorative veneer, aluminum plate, glass fiberboard, organic Glass, hard plastic, rubber blocks, metal / wood profiles and other products.
Not suitable for bonding foamed polystyrene, plasticized polyvinyl chloride, polyethylene, polypropylene, mirrors and some artificial leather.
Thermal Conductive grease ShinEtsu KS-609 / KS609
KS609 is a thermal conductive grease. It has excellent thermal properties (thermal conductivity 0.75WM / K),
General using for electronic devices.
The product is excellent insulation properties, volatile small and easy to use. Excellent Heat – resistant and cold – resistant .
Wide temperature range, no cure with low temperature -50 ℃ .
Araldite AV138/HV998 glue two component epoxy AB structure gemstone sealing glue
Method of use
1. Pretreatment: It is recommended to use acetone or isopropyl alcohol (for plastics) to clean the adhesive surface to remove oil stains, stains and dust.Araldite AV138M/HV998 cannot be used with low alcohol, gasoline or paint thinner.Mechanically sanded or chemically cleaned surfaces provide stronger, more durable bonds.
2. Sizing: This product can be evenly coated on the pretreated surface to be bonded with a spatula.AralditeAV138M/HV998 usually 0.05-0.10mm thick adhesive layer can be the maximum lap shear strength of the bond.Bonded parts should be fully and clamped immediately after applying adhesive.
METAFLUX 70-78
Specifications: 400ml / support
1. Very high stainless steel content
2. High alloy stainless steel particles and weather resistant synthetic resin to form a good stainless steel corrosion
3. Color: stainless steel, chrome: 18%, nickel: 8%, manganese: 2%
4. Maximum heat-resistant temperature: 300 ℃ Application: applicable to all metals, wood, glass, ceramics and most of the plastic
5. Metaflux 70-78 stainless steel spray has excellent stainless steel coating
6. Good weather resistance, with anti-corrosion ability
7. Anti-wear
8. Quick dry, dry for 5 minutes
pattex px4l
Suitable for metal, rubber, leather, fabric and other materials. Especially paste plywood, fibreboard, planing
Decorative panels (fire board), aluminum composite panels, glass fiberboard, plexiglass, hard plastic,
Rubber blocks. Wood: part of the plastic products before the proposed cohesion sticky. Not suitable for pasting polystyrene, plastic
Ethylene, polyethylene, polypropylene, mirrors and some artificial leather.