3M sp-7533 Screen printing glue adhesives
Agitation
There may be some separation in the upper layer of adhesive after long term storage.
Stir well before using
- 描述
- Global Tab
描述
Form and Appearance
3M™ Screen-Printable Adhesive SP7533 is a waterborne emulsion adhesive. Once dried, the adhesive can not be re-emulsified.
Dilution
Use this adhesive directly from the container without dilution
Agitation
There may be some separation in the upper layer of adhesive after long term storage.
Stir well before using
Additives
Avoid adding additives such as defoamers as they may reduce adhesion.
Container
Close lid tightly for storage. Adhesive surface will skin over if left unopened for
several hours. Avoid returning adhesive to container.
相关产品
-
LOCTITE 416 general purpose ethyl-based instant adhesive
LOCTITE 416 is a transparent, colourless, high viscosity, general purpose ethyl-based instant adhesive. Suitable for metals, rubbers and plastic, it is also suitable for polyolefins in combination with Primer LOCTITE 770 or LOCTITE 7239. It has a fixture time of 20 – 40 secs.
-
Araldite 2014-1 ab glue
Key Features
• Gray paste
• High temperature and chemical resistance
• Low shrinkage
• Excellent resistance to water and resistance to various chemical media
• Fill the gap with a sag thickness of up to 5 mm -
Interzone954 Modified Epoxy Resin Paint
lnterzone 954 modified epoxy resin paint:
A two-component, low VOC content, thick paste type, modified epoxy shielding coating, construction of single-channel coating, that is, with long-term protection. Immersed in water, can continue to cure, with excellent engage in cathode stripping performance. -
3MDP460 epoxy glue
Epoxy adhesive (often referred to as epoxy glue) is widely used in building and home construction; aircraft and automobile manufacturing; bicycle, boat, golf clubs, ski and snowboard assembly as well as a host of home use and other applications. It is used virtually anywhere high-strength bonds are needed along with resistance to environmental conditions.
-
Thermal Conductive grease ShinEtsu KS-609 / KS609
KS609 is a thermal conductive grease. It has excellent thermal properties (thermal conductivity 0.75WM / K),
General using for electronic devices.
The product is excellent insulation properties, volatile small and easy to use. Excellent Heat – resistant and cold – resistant .
Wide temperature range, no cure with low temperature -50 ℃ .
