603 cylindrical solid glue
Loctite603 cylindrical solid glue, henkel loctite 603 glue is a kind of one-component, anaerobic type solid hold glue, used to hold cylindrical mating parts. In isolation with air condition, the condition of the product in two close coordination between the metal surface of curing, even on the surface of the base material that is slightly polluted oil has good adhesion.
Typical use: the intensity, good for oily, used for bonding cylindrical mating parts, especially in cannot ensure bonding surface is clean. Applications include rolling bearing or oil-immersed bushing is fixed onto the base.
Color: green.
- 描述
- Global Tab
描述
Loctite603 cylindrical solid glue, henkel loctite 603 glue is a kind of one-component, anaerobic type solid hold glue, used to hold cylindrical mating parts. In isolation with air condition, the condition of the product in two close coordination between the metal surface of curing, even on the surface of the base material that is slightly polluted oil has good adhesion.
Typical use: the intensity, good for oily, used for bonding cylindrical mating parts, especially in cannot ensure bonding surface is clean. Applications include rolling bearing or oil-immersed bushing is fixed onto the base.
Color: green.
Largest fill gaps: 0.127 mm;
Mixer viscosity (mPa) s) 100 ~ 150;
Heat resistance: – 54 ℃ to 150 ℃;
Pieces of steel shaft and sleeve ~ shear strength (psi) 3260;
Cure time: early is 20 minutes, the whole solid 24 small
Get free sample or more information , please contact me with my email: jenny@fuji-hk.cn . thank you .
相关产品
-
LOCTITE 222 for the locking and sealing of threaded fasteners
For Assembly
1. For best results, clean all surfaces (external and internal)
with a LOCTITE®
cleaning solvent and allow to dry.
2. If the material is an inactive metal or the cure speed is too
slow, spray all threads with Activator SF 7471™ or SF
7649™ and allow to dry.
3. Shake the product thoroughly before use.
4. To prevent the product from clogging in the nozzle, do not
allow the tip to touch metal surfaces during application.
5. For Thru Holes, apply several drops of the product onto
the bolt at the nut engagement area.
6. For Blind Holes, apply several drops of the product down
the internal threads to the bottom of the hole.
7. Assemble and tighten as required.
8. For Sealing Applications, apply a 360° bead of product
to the leading threads of the male fitting, leaving the first
thread free. Force the material into the threads to
thoroughly fill the voids. For bigger threads and voids,
adjust product amount accordingly and apply a 360° bead
of product on the female threads also. -
Henkel LOCTITE 460 Instant adhesive Low bleaching low odor quick drying adhesive Metal plastic rubber universal
The rate of cure will depend on the ambient relative
humidity. The best results are achieved when the relative
humidity in the working environment is 40% to 60% at 22°C.
Lower humidity leads to slower cure. Higher humidity
accelerates it, but may impair the final strength of the bond. -
LOCTITE SF 7452 increased cure speed of LOCTITE cyanoacrylate adhesives
- Cures excess adhesive
- Provides excellent cosmetic appearance avoiding the white discoloration of instant adhesives
- Not recommended on plastics prone to stress cracking
-
Henkel LOCTITE 403 Quick Drying Adhesive Low odor low bleaching High strength quick drying adhesive multi-purpose active adhesive
LOCTITE 403 is a medium viscosity, low odor, low albino, alkoxyethyl transient dry adhesive suitable for use in difficult vapor control situations. It can quickly bond to a variety of materials, including metals, plastics and elastomers. Especially suitable for bonding porous or absorbent materials.
Product Features
1. Low odor, suitable for situations where steam control is essential
2. Low bleaching, suitable for the manufacture of cosmetics
3. Colorless and transparent
4. Very suitable for porous substrates
-
LOCTITE EA E-120HP epoxy structural adhesive High strength metal plastic adhesive solvent resistant
- Product Name: LOCTITE EA E-120HP
Product specification: 50ml
Composition: Two components
Appearance (not cured): Amber
Viscosity (mpa.s): resin :41000~61000 curing agent :2000~4000
Tolerance temperature (℃): -55~120℃
Operation time: 120 minutes
Curing method: mixed room temperature curing
Chemical type: epoxy resin
Application characteristics: Two component industrial grade epoxy resin adhesive. It cures at room temperature to form a tough adhesive layer with excellent peel resistance and impact resistance.
- Product Name: LOCTITE EA E-120HP
