Araldite AB Slow dry glue
Make sure the surfaces to be joined are clean, dry and free from grease. Roughen smooth, glossy surfaces. Squeeze out equal amounts of Resin and Hardener. Mix thoroughly and use within 5 minutes (18-24°c room temperature).
Apply mix to both joint surfaces.
Assemble parts and hold together with clamps,tape, string or weights,etc. for 10 – 15 minutes. The newly bonded joint can be handled after 3 hours and attains its full strength after about 8 hours.
- Global Tab
1. Clean and dry the surfaces to be bonded. For smooth surface you’d better to sand grind it first.
2. Turn the lid off the tube, pierce aluminium seal of tube mouth by coping, squeeze out equal volume of adhesive liquid and solidification agent from tubes A and B, then mix them evenly with blending board and use immediately.
3. Apply the blended adhesive on the surfaces of material or appliance to be bonded and mended. It can be solidified in five minutes after the surface is bonded together at room temperature. The things bonded may be used in three hours.
4. Points for attention:
Don’t exchange the lids of tubes A and B with different colours. For ebery-time use, blend proper quantity of adhesive according to requirements. Blend adhesive as you need and use it up within three to four minutes.During using, avoid touching amd sticking skin. In case of touch, please wash skin with soap and water at once. Keep it away from children.