Compatherm filler 9343 thermally conductive two-part addition cured compound from Nolato
The product is used to transfer heat from heat sources, such as components on a
PCB, to a heat sink. Compatherm filler 9343 has the ability to cover various gap
heights and complex geometries with a very low closure force.
Compatherm filler key properties 9343
− 4 W/(mK) thermal conductivity
− Operating temperature -40 to +150˚ C
− Very good wetting
− Two-part material gives high mechanical stability after curing
- Global Tab
Compatherm filler 9343 can be stored 5 months after production date at 0 to 30°C.
Cartridges are recommended to be stored nozzle down. Only components A and B
with the same lot number may be processed together.
Some degree of sedimentation can occur over time. If sedimentation is suspected
additional stirring/mixing of the A and B components in pales is recommended to
ensure homogeneous properties of the cured filler