DOW CORNING 1-4105 adhesive curingeps raw Coating material
Dow Corning 1-4105 Conformal Coating Low viscosity, low temperature fast curing, heat curing, transparent coating single component, solvent-free elastomer, fast heating curing, transparent, resistant to moisture and other harsh environments; good dielectric properties.
- 描述
- Global Tab
描述
Dow Corning 1-4105 Conformal Coating Low viscosity, low temperature fast curing, heat curing, transparent coating single component, solvent-free elastomer, fast heating curing, transparent, resistant to moisture and other harsh environments; good dielectric properties.
相关产品
-
konishi SL210B synthetic adhesive for electronic parts quick drying glue adhesive
Conforms to the REACH Regulation of the Committee Regulation (EU) No. 276/2010 on Appendix XVII.
Liquid at room temperature curing elastic adhesive
Not used RoHS specified six substances (cadmium, lead, mercury, hexavalent chromium and its compounds, polybrominated biphenyls, polybrominated diphenyl ethers).
Low-molecular-weight cyclic polysiloxanes that may cause contact barriers are not used.
Ultra fast curing -
Dow corning DOWSIL™ 3140 RTV Coating
- One-part no mixing required
- Good flowability, Able to flow, fill or self-leveling after dispensing
- Room temperature cure, no ovens required
- Faster in-line processing with optional heat acceleration
- No added solvents
- UL 94 V-1, IPC-CC-830 and MIL-A-46146 tested
- Can be considered for uses requiring added flame resistance, IPC or Mil Spec testing
- UL 746E / UL746C Recognized
- UV indicator for manual and automated inspection
-
DOW CORNING PV 7326 Potting Agent
Dow Corning PV-7010 Potting Agent is a two component, silicone elastomer liquid that is used for potting solar module junction boxes, thermal control, and environmental protection. It provides flowability, minimal shrinkage, and is room temperature or heat curing. 1:1 mix ratio by weight or volume.
-
Dow corning DOWSIL™ 732 Multi-Purpose Sealant
All surfaces should be thoroughly cleaned and/or degreased with DOWSIL™ brand OS
Fluids, naphtha, mineral spirits, methyl ethyl ketone (MEK) or other suitable solvent.
Solvents such as acetone or isopropyl alcohol (IPA) do not tend to remove oils well, and any
oils remaining on the surface may interfere with adhesion. Light surface abrasion is
recommended whenever possible, because it promotes good cleaning and increases the
surface area for bonding. A final surface wipe with acetone or IPA is also useful. Some
cleaning techniques may provide better results than others; users should determine the best
techniques for their particular applications. -
DOW CORNING CN-8760 AB epoxy glue
Two-part, 1 to 1 Gray Silicone Elastomer, RT and heat cure for manufacturing flexibility, harder elastomer with moderate thermal conductivity
