Dow corning 1200 OS epoxy primer paint
Instructions
1. Clean the dust, dirt, tar, oil traces and other debris on the left and right surfaces thoroughly. Use abrasive cleaning agents or metal brushes to remove rust and scale from metal surfaces. Stone surface with a metal brush or with compressed air to remove dust.
2. Clean the surface with a clean, degreased surface with a rag with an industrial solvent similar to IPA (acetone), naphtha, vegetable oil, xylene, toluene or MEK.
For rough or porous substrate surfaces, the recommended coverage is about 400 ft2 / gal (9.8 m2 / L). On flat metal surfaces, coverage may reach 800 square feet per gallon (19.6 square meters / L).
4. Allow the primer to dry for at least 15 minutes. Precise time should be based on the outside world
Temperature, humidity and porosity of the substrate.
5. Direct use of silicone glaze material or building sealant.
- 描述
- Global Tab
描述
Instructions
1. Clean the dust, dirt, tar, oil traces and other debris on the left and right surfaces thoroughly. Use abrasive cleaning agents or metal brushes to remove rust and scale from metal surfaces. Stone surface with a metal brush or with compressed air to remove dust.
2. Clean the surface with a clean, degreased surface with a rag with an industrial solvent similar to IPA (acetone), naphtha, vegetable oil, xylene, toluene or MEK.
For rough or porous substrate surfaces, the recommended coverage is about 400 ft2 / gal (9.8 m2 / L). On flat metal surfaces, coverage may reach 800 square feet per gallon (19.6 square meters / L).
4. Allow the primer to dry for at least 15 minutes. Precise time should be based on the outside world
Temperature, humidity and porosity of the substrate.
5. Direct use of silicone glaze material or building sealant.
Get free sample or more information , please contact me with my email: jenny@fuji-hk.cn . thank you .
相关产品
-
DOWSIL OS-20 Odorless environmental protection thinner Insulation coating three – resistant paint
Brand: Dow Corning
Model: OS – 20
Origin: USA
Specification: 15 kg
Shelf life :24 months
Curing speed: full solid 24 hours
Curing type: self-drying type -
Dow corning DOWSIL SE 4450 Thermally Conductive Adhesive
Dow thermally conductive compounds are grease like silicone materials, heavily filled with heat-conductive metal oxides. This combination promotes high thermal conductivity, low
bleed and high-temperature stability. The compounds are designed to maintain a positive heat sink seal to improve heat transfer from the electrical device or PCB system assemblies
to the heat sink or chassis, thereby increasing the overall efficiency of the device. or PCB system assemblies are continually designed to deliver higher performance. Especially in the area of consumer devices, there is also a continual trend towards smaller, more compact designs. In combination these factors typically mean that more heat is generated in the device. Thermal management of PCB system assemblies is a primary concern of design engineers. A cooler device allows for more efficient operation and better reliability over the life of the device. As such, thermally conductive compounds play an integral role here. Thermally conductive materials act as a thermal “bridge” to remove heat from a heat source (device) to the ambient via a heat transfer media (i.e. heat sink). These materials have properties such as low thermal resistance, high thermal conductivity, and can achieve thin Bond Line Thicknesses (BLTs) which can help to improve the transfer of heat away from the device. -
DOWSIL Corning 3-6265 adhesive fixed sealant black resin sealant fast thermosetting
One piece, black, heat cured, high strength, self priming, non-flow version 3-6265 with UV indicator. Suitable for automotive and industrial assembly applications, including seal covers and enclosures, joint bottom gaskets and connector seals
-
DOWSIL 1-2620 Low VOC Conformal Coating version is supplied with a lower VOC content compared to that of the DOWSIL 1-2620 Dispersion and has equivalent Mil spec, IPC-CC-830 and UL recognitions.
RTV elastoplastic conformal coatings have firm, dry surfaces for better handling and
abrasion resistance after cure. Various viscosity versions facilitate different application
methods. They require atmospheric moisture to cure (no ovens) and their cure rates can be
accelerated by mild heat. Conformal coatings are materials applied in thin layers onto
printed circuits boards or other PCB system assembly substrates -
Dow corning DOWSIL™ 3140 RTV Coating
- One-part no mixing required
- Good flowability, Able to flow, fill or self-leveling after dispensing
- Room temperature cure, no ovens required
- Faster in-line processing with optional heat acceleration
- No added solvents
- UL 94 V-1, IPC-CC-830 and MIL-A-46146 tested
- Can be considered for uses requiring added flame resistance, IPC or Mil Spec testing
- UL 746E / UL746C Recognized
- UV indicator for manual and automated inspection
