Genuine Nye lubricants 570h-10 bearing grease film lubricating oil dryness
appearance
Properties liquid.
Form liquid semi-solid
Colorless color
Slightly scented
No data on pH value.
Melting point / freezing point no data available.
Product Name: nyetact 570h-10
Boiling point, initial boiling point and boiling range are not available.
Flash point > 300.0 ° C (> 572.0 ° f) ASTM d-92
Lower limit of combustion (%) no data available.
Upper limit of combustion (%) no data available.
Lower explosive limit (%) no data available.
Upper explosion limit (%) no data available.
Estimation of vapor pressure 2.39 HPA
Vapor density 11.7 (solvent)
The relative density is not available.
Density 1.70 g / C ㎡
1.70 g/c㎡
Solubility
Solubility (water) no data available.
Partition coefficient (octanol / water) no data available.
No data on spontaneous combustion temperature.
No data on decomposition temperature.
Other data
Kinematic viscosity 500 CST
Kinematic viscosity (40 ° f)
Pour point – 28’c (- 18.4 ° f)
The shelf life is 4 years
- 描述
- Global Tab
描述
Typical Properties of the Oil | Typical Value | \ Test Method | ||
Recommended Service Range (°C) | -20 to 225 | |||
Base Oil | Type | Perfluoro poly ether | ||
Kinematic Viscosity | 100°C | 43 cSt | ASTM D^45 | |
40°C | 500 cSt | ASTM D-445 | ||
Viscosity Index | 144 | ASTM D-2270 | ||
Flash Point | °C | > 300.0000 | ASTM D-92 | |
Pour Point | °C | -23 | ASTM D-97 | |
Density | 25°C | 1.9 g/cm3 | NYE CTM | |
Evaporation 6.5 houi(s) | 200nC | 1 % | ASTM D-972 | |
Typical Properties of the Grease | Typical Value | Test Method | ||
Color, Appearance | Colorless | |||
Thickener | Silica | |||
Density | 250°C | 1.8 g/cm3 | NYE CTM | |
Evaporation | 6.5 hour(s) | 200°C | < 0.1 % | NYE CTM |
Typical Properties of the Solvent | Typical Value | Test Method | ||
Chemical Composition | Fluoroalkane | |||
Concentration by Weight | 90% | |||
Evaporation Rate | 0.19 g/cm2/hr | |||
Flash Point | °C | >303 | ASTM D-92 | |
Boiling Point | °C | 30-60 | ASTM D-92 | |
Freezing Point | <-73 | ASTM D-1480 | ||
Density | 25°C | 1.7 g/cm3 | ASTM D-1480 |