Henkel LOCTITE 503HV High temperature Resistant Pipe Thread sealing glue Acrylic adhesive
Product name :LOCTTTE
Specification: 2 kg
Origin: China
Component one: a single component
Characteristics: High temperature resistance, aging resistance
Curing method: Curing at room temperature
Application: Suitable for thread sealing and household appliances
- 描述
- Global Tab
描述
LOCTITE 503HV is a white, thixotropic, acrylic thread sealer liquid. This non-toxic material is suitable for automatic dispensing operations and will dry to become an elastic, tight sealant for screw or straight threads. Suitable for use that may require readjusting and can be reused up to five times.
Product features
1. Suitable for automatic dispensing applications
2. Elastic and tight
3. Suitable for taper or straight line
4. It can be reused up to 5 times
5. Perfect for applications that require tuning
6. Excellent anti-environmental properties
相关产品
-
Original Henkel LOCTTIE Loctite 190024 UV curing adhesive liquid optical UV shadow free glue
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.12
Viscosity, Brookfield – HBT, 25 °C, mPa·s (cP):
Spindle TB, speed 10 rpm, , Helipath 18,000 to 35,000LMS
TYPICAL CURING PERFORMANCE
LOCTITE®
DSP 190024™ can be cured by exposure to UV
and/or visible light of sufficient intensity. Surface cure is
enhanced by exposure to UV light in the 220 to 260 nm range.
Cure rate and ultimate depth of cure depend on light intensity,
spectral distribution of the light source, exposure time and light
transmittance of the substrate through which the light must
pass.
Fixture Time
UV fixture time is defined as the light exposure time
required to develop a shear strength of 0.1 N/mm².
UV Fixture Time, Glass microscope slides, seconds:
6 mW/cm², measured @ 365 nm ≤10LMS -
Henkel LOCTITE 403 Quick Drying Adhesive Low odor low bleaching High strength quick drying adhesive multi-purpose active adhesive
LOCTITE 403 is a medium viscosity, low odor, low albino, alkoxyethyl transient dry adhesive suitable for use in difficult vapor control situations. It can quickly bond to a variety of materials, including metals, plastics and elastomers. Especially suitable for bonding porous or absorbent materials.
Product Features
1. Low odor, suitable for situations where steam control is essential
2. Low bleaching, suitable for the manufacture of cosmetics
3. Colorless and transparent
4. Very suitable for porous substrates
-
Loctite Series E-90FL, Epoxy Adhesive, Dual-Cartridge, 1.69 oz, Gray, 90 min Work Life
- Technical parameters of Loctite E-90FL:
Model number: loctite E-90FL
Color: Gray;
Viscosity @25°C, mPa.s(cP) 62000-81000;
Applicable time: 90 minutes;
Volume mixing ratio (resin: stearic agent) : 1:1;
Peel strength (piw) : 5-40;
Shear strength (psi*) : 1000-3000;
Glass conversion temperature (℃) : -5
- Technical parameters of Loctite E-90FL:
-
LOCTITE271 designed for the permanent locking and sealing of threaded fasteners.
LOCTITE
271 designed for the permanent locking and
sealing of threaded fasteners. The product cures when
confined in the absence of air between close fitting metal
surfaces and prevents loosening and leakage from shock and
vibration. Typical applications include the locking and sealing
of large bolts and studs (up to M25 ).Specific Gravity 25 °C 1.1
Flash Point – See SDS
Viscosity, Brookfield – RVT, 25 °C, mPa·s (cP):
Spindle 1, speed 10 rpm, 400 to 600LMS -
LOCTITE AA3052 UV-curable UV adhesive High Temperature impact resistant anaerobic glue acrylate
LOCTITE AA 3052 is an amber-colored, clear, UV-curing modified field-based acrylate anaerobic adhesive that rapidly cures on PRIMER N-treated metal surfaces in the absence of air. Excess glue can also be solidified into a solid by exposure to ultraviolet light. It can be used to bond glass, plastic, metal, ceramics, etc. inside motor enclosures, magnet assemblies, piezoelectric buzzers, and many other applications.
