LOCTITE 319 Universal Structural adhesive adhesive single component UV setting glue
- 描述
- Global Tab
描述
Product introduction
LOCTITE LOCTITE 319 is a single component, general purpose, anaerobic structural adhesive for bonding rigid components. This product is between two close parts and can be cured with the help of substrate 7649.
Typical application
This product is mainly used for bonding metal, glass, ceramic or plastic.
相关产品
-
LOCTITE 416 general purpose cyanoacrylate instant adhesive.
The rate of cure will depend on the bondline gap. Thin bond
lines result in high cure speeds, increasing the bond gap will
decrease the rate of cure. -
LOCTITE 609 designed for the bonding of cylindrical fitting parts
LOCTITE 609 is tested to the lot requirements of Military
Specification Mil-R-46082B. Note: This is a regional approval.
Please contact your local Technical Service Center for more
information and clarification. -
LOCTITE 243 designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools
Prevail Torque 180°, ISO 10964, Pre-torqued to 5 N·m:
M10 black oxide bolts and mild steel
nuts
N·m 4
(lb·in) (35)
3/8 x 16 steel nuts and bolts N·m 3.5
(lb·in) (30)
Compressive Shear Strength, ISO 10123
Steel pins and collars N/mm² 7.6
(psi) (1,100)
Cured for 1 week 23°C
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m:
M10 zinc phosphate nuts and bolts N·m 26
(lb·in) (230)
M10 stainless steel bolts and nuts N·m 17
(lb·in) (150)
TYPICAL ENVIRONMENTAL RESISTANCE
Cured for 1 week 23°C
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m:
M10 zinc phosphate steel nuts and bolts -
Henkel LOCTITE 460 Instant adhesive Low bleaching low odor quick drying adhesive Metal plastic rubber universal
The rate of cure will depend on the ambient relative
humidity. The best results are achieved when the relative
humidity in the working environment is 40% to 60% at 22°C.
Lower humidity leads to slower cure. Higher humidity
accelerates it, but may impair the final strength of the bond. -
LOCTITE 638 designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm
LOCTITE 638 is designed for the bonding of cylindrical
fitting parts, particularly where bond gaps can approach 0.25
mm and where maximum strength at room temperature is
requiredThe product cures when confined in the absence of air
between close fitting metal surfaces and prevents loosening
and leakage from shock and vibrationTypical applications
include locking bushings and sleeves into housings and on shaftsL
