Loctite 407 quick-drying glue 50 grams of packaging
LOCTITE 407 is a universal type adhesive is especially suitable for used for refractory material.
Before solidification material properties
The proportion of @ 25 ° C 1, 05
Cone and Plate measuring instrument, :
Temperature: 25 ° C, shear rate: 3, 000 s
- 描述
- Global Tab
描述
LOCTITE 407
407 has the following features:
Technology: cyanoacrylate
Chemical types: cyano ethyl acrylate
Outside view: colorless transparent to light straw color liquid LMS
Set into: single-component – no mixing
Sticky degree: 25 to 55
Curing way: moisture curing promoter
Should be used: adhesive
Adhesive backing material: rubber, plastic and metal
LOCTITE 407 is a universal type adhesive is especially suitable for used for refractory material.
Before solidification material properties
The proportion of @ 25 ° C 1, 05
Cone and Plate measuring instrument, :
Temperature: 25 ° C, shear rate: 3, 000 s
Get free sample or more information , please contact me with my email: jenny@fuji-hk.cn . thank you .
相关产品
-
Original Henkel LOCTTIE Loctite 190024 UV curing adhesive liquid optical UV shadow free glue
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.12
Viscosity, Brookfield – HBT, 25 °C, mPa·s (cP):
Spindle TB, speed 10 rpm, , Helipath 18,000 to 35,000LMS
TYPICAL CURING PERFORMANCE
LOCTITE®
DSP 190024™ can be cured by exposure to UV
and/or visible light of sufficient intensity. Surface cure is
enhanced by exposure to UV light in the 220 to 260 nm range.
Cure rate and ultimate depth of cure depend on light intensity,
spectral distribution of the light source, exposure time and light
transmittance of the substrate through which the light must
pass.
Fixture Time
UV fixture time is defined as the light exposure time
required to develop a shear strength of 0.1 N/mm².
UV Fixture Time, Glass microscope slides, seconds:
6 mW/cm², measured @ 365 nm ≤10LMS -
Loctite 290 motor magnetic steel magnet glue thread locking anaerobic adhesive engine motor adhesive
LOCTITE® 290 is a liquid medium/high strength thread locking agent used to secure and seal threaded fasteners. The product penetrates between meshing threads through low viscosity and capillary penetration without disassembly before coating. This product is solidified between tightly matched metal surfaces and isolated from air to prevent loosening and leakage caused by shock and vibration. The product can also be used to fill microholes in welded, cast or powder metallurgy parts.
-
LOCTITE 609 designed for the bonding of cylindrical fitting parts
LOCTITE 609 is tested to the lot requirements of Military
Specification Mil-R-46082B. Note: This is a regional approval.
Please contact your local Technical Service Center for more
information and clarification. -
LOCTITE 510 cures when confined in the absence of air between close fitting metal surfaces
NSF International Registered to NSF Category P1 for use as a sealant where
there is no possibilty of food contact in and around food
processing areas. Note: This is a regional approval. Please
contact your local Technical Service Center for more
information and clarification. -
Henkel LOCTITE 403 Quick Drying Adhesive Low odor low bleaching High strength quick drying adhesive multi-purpose active adhesive
LOCTITE 403 is a medium viscosity, low odor, low albino, alkoxyethyl transient dry adhesive suitable for use in difficult vapor control situations. It can quickly bond to a variety of materials, including metals, plastics and elastomers. Especially suitable for bonding porous or absorbent materials.
Product Features
1. Low odor, suitable for situations where steam control is essential
2. Low bleaching, suitable for the manufacture of cosmetics
3. Colorless and transparent
4. Very suitable for porous substrates
