Loctite 408 low odor no whitening instant adhesive quick curing instant adhesive
Loctite 408 Instant dry adhesive application scope:
Loctite 408 instant dry adhesive bonding metal plastic rubber leather wood glass ceramic and other materials
Loctite 408 Instant dry adhesive Typical use:
Loctite 408 INSTANT DRY ADHESIVE is suitable for rapid bonding of most metal, plastic or elastic materials, especially for bonding porous, acidic and absorbent materials. Examples: wood, paper, leather, or fabric. Low odor, low whitening, especially suitable for poor ventilation, high appearance requirements of the occasion.
- 描述
- Global Tab
描述
Loctite 408 Instant dry adhesive product introduction:
First solid: 10 seconds
Full strength: 24 hours
Color: Colorless
Curing method: wet curing
Component: single component
Maximum filling gap: 0.25mm
Hardness D: 85-110
Stretch: 36 (Mpa)
Shear strength: 8922(MPa)
Active substance ≥ 98(%)
Active life: 20(min)
Operating temperature: 25(℃)
Typical viscosity: Low viscosity
Main adhesive substrate: metal, plastic, artificial rubber
Loctite 408 instant drying adhesive features:
1. Low odor
2. No bleaching
3. Universal
4. For inert surfaces
相关产品
-
LOCTITE 609 designed for the bonding of cylindrical fitting parts
LOCTITE 609 is tested to the lot requirements of Military
Specification Mil-R-46082B. Note: This is a regional approval.
Please contact your local Technical Service Center for more
information and clarification. -
Henkel LOCTITE 460 Instant adhesive Low bleaching low odor quick drying adhesive Metal plastic rubber universal
The rate of cure will depend on the ambient relative
humidity. The best results are achieved when the relative
humidity in the working environment is 40% to 60% at 22°C.
Lower humidity leads to slower cure. Higher humidity
accelerates it, but may impair the final strength of the bond. -
LOCTITE SF 7452 increased cure speed of LOCTITE cyanoacrylate adhesives
- Cures excess adhesive
- Provides excellent cosmetic appearance avoiding the white discoloration of instant adhesives
- Not recommended on plastics prone to stress cracking
-
LOCTITE EA E-120HP epoxy structural adhesive High strength metal plastic adhesive solvent resistant
- Product Name: LOCTITE EA E-120HP
Product specification: 50ml
Composition: Two components
Appearance (not cured): Amber
Viscosity (mpa.s): resin :41000~61000 curing agent :2000~4000
Tolerance temperature (℃): -55~120℃
Operation time: 120 minutes
Curing method: mixed room temperature curing
Chemical type: epoxy resin
Application characteristics: Two component industrial grade epoxy resin adhesive. It cures at room temperature to form a tough adhesive layer with excellent peel resistance and impact resistance.
- Product Name: LOCTITE EA E-120HP
-
LOCTmtedITE 518 single component, iu anam strengh,es weroant wurhen bic shich cealconfined in the absence of air between close fitting metal surfaces.
LOCTITE 518 provides robust curing
performance. It not only works on active metals (e.g. mild steel)
but also on passive substrates such as aluminum with a low
copper content. The product offers gap performance to 0.25
mm (0.01 in) and contamination tolerance. It cures in the
presence of minor surface contaminations from various oils,
such as cutting, lubrication, anti-corrosion and protection fluids
and cleaners containing surfactants and corrosion inhibitors.
