LOCTITE 416 general purpose cyanoacrylate instant adhesive.
The rate of cure will depend on the bondline gap. Thin bond
lines result in high cure speeds, increasing the bond gap will
decrease the rate of cure.
- 描述
- Global Tab
描述
Commercial Item Description A-A-3097:
LOCTITE 416 has been qualified to Commercial Item
Description A-A-3097. Note: This is a regional approval.
Please contact your local Technical Service Center for more
information and clarification.
相关产品
-
LOCTITE 243 designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools
Prevail Torque 180°, ISO 10964, Pre-torqued to 5 N·m:
M10 black oxide bolts and mild steel
nuts
N·m 4
(lb·in) (35)
3/8 x 16 steel nuts and bolts N·m 3.5
(lb·in) (30)
Compressive Shear Strength, ISO 10123
Steel pins and collars N/mm² 7.6
(psi) (1,100)
Cured for 1 week 23°C
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m:
M10 zinc phosphate nuts and bolts N·m 26
(lb·in) (230)
M10 stainless steel bolts and nuts N·m 17
(lb·in) (150)
TYPICAL ENVIRONMENTAL RESISTANCE
Cured for 1 week 23°C
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m:
M10 zinc phosphate steel nuts and bolts -
LOCTITE SF 7455 used where increased cure speed of LOCTITE cyanoacrylate adhesives is required.
LOCTITE 7455 typical applications include
bonding dissimilar materials such as metals, glass or ceramics
and where fast fixturing is required between close fitting parts.LOCTITE 7455 typical applications include
bonding dissimilar materials such as metals, glass or ceramics
and where fast fixturing is required between close fitting parts. -
Loctite Series E-90FL, Epoxy Adhesive, Dual-Cartridge, 1.69 oz, Gray, 90 min Work Life
- Technical parameters of Loctite E-90FL:
Model number: loctite E-90FL
Color: Gray;
Viscosity @25°C, mPa.s(cP) 62000-81000;
Applicable time: 90 minutes;
Volume mixing ratio (resin: stearic agent) : 1:1;
Peel strength (piw) : 5-40;
Shear strength (psi*) : 1000-3000;
Glass conversion temperature (℃) : -5
- Technical parameters of Loctite E-90FL:
-
Henkel LOCTITE M18 Metal loosening decontamination antirust bolt screw lubricant
Instructions
1.Shake the product can thoroughly before use.
2.Flip the attached metal straw up and spray at a distance of about 5-10cm with the metal straw onto area.
3.Repeat application twice or three times on rusted, corroded and seized parts and then knock the parts by a rubber hammer or sinilar tools lightly for best results.
4.Aiter use, flip the straw down and stored in cool and dry place.
-
LOCTITE 638 designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm
LOCTITE 638 is designed for the bonding of cylindrical
fitting parts, particularly where bond gaps can approach 0.25
mm and where maximum strength at room temperature is
requiredThe product cures when confined in the absence of air
between close fitting metal surfaces and prevents loosening
and leakage from shock and vibrationTypical applications
include locking bushings and sleeves into housings and on shaftsL
