LOCTITE 480 rubber toughened adhesive with increased flexibility and peel strength along with enhanced resistance to shock.
LOCTITE 480 is a rubber toughened adhesive with
increased flexibility and peel strength along with enhanced
resistance to shock.
- 描述
- Global Tab
描述
TYPICAL CURING PERFORMANCE
Under normal conditions, the atmospheric moisture initiates the
curing process. Although full functional strength is developed
in a relatively short time, curing continues for at least 24 hours
before full chemical/solvent resistance is developed
相关产品
-
LOCTITE 243 medium strength Threadlocking Adhesive
LOCTITE 243 is a general purpose threadlocker of medium bond strength. This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration. The product works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces.
-
LOCTITE AA3052 UV-curable UV adhesive High Temperature impact resistant anaerobic glue acrylate
LOCTITE AA 3052 is an amber-colored, clear, UV-curing modified field-based acrylate anaerobic adhesive that rapidly cures on PRIMER N-treated metal surfaces in the absence of air. Excess glue can also be solidified into a solid by exposure to ultraviolet light. It can be used to bond glass, plastic, metal, ceramics, etc. inside motor enclosures, magnet assemblies, piezoelectric buzzers, and many other applications.
-
LOCTITE AA 3106 UV curing adhesive UV curing acrylate adhesive
LOCTITE® AA 3106™ is primarily designed for bonding rigid or
flexible PVC to polycarbonate where large gap filling
capabilities and flexible joints are desired. The product has
shown excellent adhesion to a wide variety of substrates
including glass, many plastics and most metals. The thixotropic
nature of LOCTITE® AA 3106™ reduces the migration of liquid
product after application to the substrate. -
LOCTITE 638 designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm
LOCTITE 638 is designed for the bonding of cylindrical
fitting parts, particularly where bond gaps can approach 0.25
mm and where maximum strength at room temperature is
requiredThe product cures when confined in the absence of air
between close fitting metal surfaces and prevents loosening
and leakage from shock and vibrationTypical applications
include locking bushings and sleeves into housings and on shaftsL -
Henkel LOCTITE M18 Metal loosening decontamination antirust bolt screw lubricant
Instructions
1.Shake the product can thoroughly before use.
2.Flip the attached metal straw up and spray at a distance of about 5-10cm with the metal straw onto area.
3.Repeat application twice or three times on rusted, corroded and seized parts and then knock the parts by a rubber hammer or sinilar tools lightly for best results.
4.Aiter use, flip the straw down and stored in cool and dry place.
