Loctite 640 anaerobic glue one component high temperature resistant acrylic cylinder holding adhesive
Brand: LOCTITE
Name: cylindrical holding glue
Model: 640
Origin: China
Class: Acrylate
Specification: 50 ml / 250 ml
Component: single component
Curing time: full setting 24 hours
Curing method: anaerobic curing
- 描述
- Global Tab
描述
Henkel LOCTITE 640 Anaerobic glue one component high temperature resistant acrylic cylindrical holding adhesive
Technical parameters of Loctite 640 glue products:
Chemical type: polypeptide acrylate
Fluorescence: Under UV light
Composition: Single component – Do not mix
Low viscosity:
Curing mode: anaerobic
High strength:
Model: Loctite 640
Gap filling (diameter) : 0.178mm
Curing time (initial solid/full solid) : 5min/24h
Recommended use of substrate: 7649/7471
Specific gravity: 1.12
Package specifications: 50ml/250ml
Loctite 640 Product features:
1. The soluble oil
2. High strength
3. The corrosion resistance
Typical applications of Loctite 640 glue products:
1. Air between tight metal surfaces and prevent shock vibration from loosening.
2. Typical applications include stoppers and splines to eliminate gaps in worn assemblies
3. Fixed bearing – prevent spinning out, keep the fraction of the rotor to the shaft and subfractional horsepower motor
4. Fix the bushing on the shell and shaft to strengthen the pressure fit and restore the fit of worn assembly or tolerance parts.
相关产品
-
LOCTITE AA3052 UV-curable UV adhesive High Temperature impact resistant anaerobic glue acrylate
LOCTITE AA 3052 is an amber-colored, clear, UV-curing modified field-based acrylate anaerobic adhesive that rapidly cures on PRIMER N-treated metal surfaces in the absence of air. Excess glue can also be solidified into a solid by exposure to ultraviolet light. It can be used to bond glass, plastic, metal, ceramics, etc. inside motor enclosures, magnet assemblies, piezoelectric buzzers, and many other applications.
-
LOCTITE 420 Quick-drying Adhesive for high and low temperature resistant metal plastics for general purpose
LOCTITE 420 is a clear, colorless, all-purpose adhesive containing ethyl capillarity. Applicable to metals, rubber and plastics, Primer LOCTITE SF 770 or LOCTITE SF 7239 can also be used in combination with polyolefin. The initial fixation time is 5-20 seconds.
Product Features
1. Fast curing between two surfaces
2. Ideal products for bonding small and medium sized parts
3. It has good adhesion to most substrates
4. Suitable for metal, rubber and plastic
5. The initial fixation time is 5-20 seconds
6. Capillarity
7. No solvent
-
Loctite 290 motor magnetic steel magnet glue thread locking anaerobic adhesive engine motor adhesive
LOCTITE® 290 is a liquid medium/high strength thread locking agent used to secure and seal threaded fasteners. The product penetrates between meshing threads through low viscosity and capillary penetration without disassembly before coating. This product is solidified between tightly matched metal surfaces and isolated from air to prevent loosening and leakage caused by shock and vibration. The product can also be used to fill microholes in welded, cast or powder metallurgy parts.
-
LOCTITE 401 designed for the assembly of difficultto-bond materials which require uniform stress distribution and strong tension and/or shear strength.
LOCTITE 401 designed for the assembly of difficultto-bond
materials which require uniform stress distribution and
strong tension and/or shear strength. The product provides
rapid bonding of a wide range of materials, including metals,
plastics and elastomers. LOCTITE 401 is also suited for
bonding porous materials such as wood, paper, leather and fabric. -
LOCTITE EA E-120HP epoxy structural adhesive High strength metal plastic adhesive solvent resistant
- Product Name: LOCTITE EA E-120HP
Product specification: 50ml
Composition: Two components
Appearance (not cured): Amber
Viscosity (mpa.s): resin :41000~61000 curing agent :2000~4000
Tolerance temperature (℃): -55~120℃
Operation time: 120 minutes
Curing method: mixed room temperature curing
Chemical type: epoxy resin
Application characteristics: Two component industrial grade epoxy resin adhesive. It cures at room temperature to form a tough adhesive layer with excellent peel resistance and impact resistance.
- Product Name: LOCTITE EA E-120HP
