Original Henkel LOCTTIE Loctite 190024 UV curing adhesive liquid optical UV shadow free glue

Original Henkel LOCTTIE Loctite 190024 UV curing adhesive liquid optical UV shadow free glue

TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.12
Viscosity, Brookfield – HBT, 25 °C, mPa·s (cP):
Spindle TB, speed 10 rpm, , Helipath 18,000 to 35,000LMS
TYPICAL CURING PERFORMANCE
LOCTITE®
DSP 190024™ can be cured by exposure to UV
and/or visible light of sufficient intensity. Surface cure is
enhanced by exposure to UV light in the 220 to 260 nm range.
Cure rate and ultimate depth of cure depend on light intensity,
spectral distribution of the light source, exposure time and light
transmittance of the substrate through which the light must
pass.
Fixture Time
UV fixture time is defined as the light exposure time
required to develop a shear strength of 0.1 N/mm².
UV Fixture Time, Glass microscope slides, seconds:
6 mW/cm², measured @ 365 nm ≤10LMS

分类:
  • 描述
  • Global Tab

描述

LOCTITE®
DSP 190024™ is primarily designed for bonding
rigid and flexible PVC to polycarbonate where large gap filling
capabilities (0.25mm) and a flexible joint are desired. Its
flexibility enhances the load bearing and shock absorbing
characteristics of the bond area. The product has shown
excellent adhesion to a wide variety of substrates including
glass, many plastics and most metals. The thixotropic nature of
LOCTITE®
DSP 190024™ reduces the migration of liquid
product after application to the substrate