LOCTITE SF 7455 used where increased cure speed of LOCTITE cyanoacrylate adhesives is required.
LOCTITE 7455 typical applications include
bonding dissimilar materials such as metals, glass or ceramics
and where fast fixturing is required between close fitting parts.
LOCTITE 7455 typical applications include
bonding dissimilar materials such as metals, glass or ceramics
and where fast fixturing is required between close fitting parts.
- 描述
- Global Tab
描述
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
with a sealant for chlorine or other strong oxidizing materials.
相关产品
-
LOCTITE 3611 Surface Adhesive SMT Red adhesive one component epoxy resin fast curing low moisture absorption
Method of use
1. In order to maintain the quality of the patch glue, please store it in the refrigerator (2±10C).
2. It should be kept at room temperature for 2^3 hours before it is removed from the refrigerator.
3. Add the back plug to the dispensing hose to obtain a more stable dispensing amount.
4 recommended dispensing temperature is 30-35℃.
5 can use toluene or ethyl acetate to clean the hose.
-
LOCTITE 416 general purpose cyanoacrylate instant adhesive.
The rate of cure will depend on the bondline gap. Thin bond
lines result in high cure speeds, increasing the bond gap will
decrease the rate of cure. -
LOCTITE 401 designed for the assembly of difficultto-bond materials which require uniform stress distribution and strong tension and/or shear strength.
LOCTITE 401 designed for the assembly of difficultto-bond
materials which require uniform stress distribution and
strong tension and/or shear strength. The product provides
rapid bonding of a wide range of materials, including metals,
plastics and elastomers. LOCTITE 401 is also suited for
bonding porous materials such as wood, paper, leather and fabric. -
LOCTITE 416 general purpose ethyl-based instant adhesive
LOCTITE 416 is a transparent, colourless, high viscosity, general purpose ethyl-based instant adhesive. Suitable for metals, rubbers and plastic, it is also suitable for polyolefins in combination with Primer LOCTITE 770 or LOCTITE 7239. It has a fixture time of 20 – 40 secs.
-
LOCTITE AA 3106 UV curing adhesive UV curing acrylate adhesive
LOCTITE® AA 3106™ is primarily designed for bonding rigid or
flexible PVC to polycarbonate where large gap filling
capabilities and flexible joints are desired. The product has
shown excellent adhesion to a wide variety of substrates
including glass, many plastics and most metals. The thixotropic
nature of LOCTITE® AA 3106™ reduces the migration of liquid
product after application to the substrate.
