LOCTITE SF 7649 used where increased cure speed of LOCTITE anaerobic products is required.

  • ,
  • LOCTITE SF 7649 used where increased cure speed of LOCTITE anaerobic products is required.
7649A
7649C
7649A
7649C

LOCTITE SF 7649 used where increased cure speed of LOCTITE anaerobic products is required.

LOCTITE SF 7455 used where increased cure speed of LOCTITE cyanoacrylate adhesives is required.
LOCTITE 510 cures when confined in the absence of air between close fitting metal surfaces

NSF International
Registered to NSF Category P1 for use as a sealant where
there is no possibilty of food contact in and around food
processing areas. Note: This is a regional approval. Please
contact your local Technical Service Center for more
information and clarification.

分类： ,
  • 描述
  • Global Tab

描述

LOCTITE SF 7649 is used where increased cure speed of
LOCTITE anaerobic products is required. It is especially
recommended for applications with passive metals or inert
surfaces and with large bond gaps. LOCTITE SF 7649 is
particularly recommended when prevailing temperature is low(<15 °C)

 

Contact Us





相关产品

  •
    Read More

    Loctai 3623 one component transparent medical grade UV curing adhesive UV glue

    Use guide

    1. The product is photosensitive. Store and operate away from sunlight, ultraviolet and artificial light.

    2. The product shall be dispensed with dispensing equipment with black feeding pipe.

    3. For best results, the surface of the bonded material should be clean and free of grease.

    4. The curing speed depends on the intensity of the light source, the distance from the light source, the curing depth, the bonding gap and the transmittance of the material..

    5. For temperature sensitive bases, such as thermoplastics, cooling is required.

    6 crystalline and semi-crystalline thermoplastics contact liquid glue need to check whether there is the possibility of stress cracking.

    7. Excessive uncured adhesives can be removed by organic solvents (e.g. acetone).

    8. The adhesive shall be cooled before bearing any load.

  •
    Read More

    Henkel LOCTITE M18 Metal loosening decontamination antirust bolt screw lubricant

    Instructions

     

    1.Shake the product can thoroughly before use.

     

    2.Flip the attached metal straw up and spray at a distance of about 5-10cm with the metal straw onto area.

     

    3.Repeat application twice or three times on rusted, corroded and seized parts and then knock the parts by a rubber hammer or sinilar tools lightly for best results.

     

    4.Aiter use, flip the straw down and stored in cool and dry place.

  •
    Read More

    LOCTITE 243 medium strength Threadlocking Adhesive

    LOCTITE 243 is a general purpose threadlocker of medium bond strength. This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration. The product works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces.

  •
    Read More

    Henkel LOCTITE 460 Instant adhesive Low bleaching low odor quick drying adhesive Metal plastic rubber universal

    The rate of cure will depend on the ambient relative
    humidity. The best results are achieved when the relative
    humidity in the working environment is 40% to 60% at 22°C.
    Lower humidity leads to slower cure. Higher humidity
    accelerates it, but may impair the final strength of the bond.

  •
    Read More

    LOCTITE SF 7109 Colorless transparent oil stain cleaner general purpose non-flammable accelerator

    Product name :LOCTITE SF7109
    Specification: 1.75 FL. OZ
    Color: colorless and transparent
    Features: non-flammable, universal type
    Shelf life :24 months
    Cleaning method: spray can
    Application: used for rust prevention, dust removal, oil removal, etc., to promote the curing of anaerobic adhesive.