Metaflux Zinc Sheen Spray 79-01 zinc flake coating
Sprayed on bare metal surface, so that can be anti-corrosion of the shiny zinc coating, repair damaged zinc coating, weld and construction of metal due to damage and damage to the surface, spot welding, all the metal body spray, drilling And re-coating of welds, construction primitives as bad weather, agricultural equipment, port facilities and shipbuilding, etc.
- 描述
- Global Tab
描述
Features
Shiny high-quality corrosion-resistant zinc coating
Easy to use
Good metallic luster
Excellent adhesion
Self-cleaning valves
product manual
Sprayed on bare metal surface, so that can be anti-corrosion of the shiny zinc coating, repair damaged zinc coating, weld and construction of metal due to damage and damage to the surface, spot welding, all the metal body spray, drilling And re-coating of welds, construction primitives as bad weather, agricultural equipment, port facilities and shipbuilding, etc.
Get free sample or more information , please contact me with my email: jenny@fuji-hk.cn . thank you .
相关产品
-
Metaflux 70-19 protective film spray circuit board three anti-paint
Color: colorless and transparent
Temperature: -40 ° C to 200 ° C
Breakdown voltage: 12Kv
30 square meters per can
-
METAFLUX 70-05scale inhibitor corrosion inhibitor
Product Description: The 70-05 series is a special rust-removing solvent for fastened stuck bolts. It is an efficient “liquid wrench” that can penetrate into oil, grease and carbonized oil. A few minutes will be able to loosen a variety of serious corrosion or stuck bolt parts, and can quickly remove the various due to freezing shrinkage, corrosion and burr caused by the phenomenon of screw stuck. Product viscosity below water and penetration is stronger than the traditional stripping oil, does not contain any acidic substances (especially phosphoric acid), does not contain any grease or oily substances, the composition of non-toxic side effects. Through the cooling shrinkage to rust the loose bolts, the treated place 10 to 15 minutes after the automatic decomposition, will not produce fisheye effect. The treated surface can be sprayed after 15 minutes
-
Metaflux Zinc Sheen Spray 70-43 Bright Zinc thermal spray coating machine
70-43 and 70-45 role, just 1% of aluminum particles instead of 1% of zinc, so that the surface effect is very bright.
Products in accordance with DIN50976 (1980) European anti-corrosion standards, excellent adhesion, can replace the hot galvanized for bare metal surface, the formation of anti-corrosion zinc coating; can also be used for the repair of galvanized parts, such as cutting surface, Make hot galvanized repair parts.
Under normal conditions of use, the anti-corrosion time in the atmosphere up to twenty years or more. And the market on the ordinary zinc powder paint has a bad day.
-
supply Metaflux 70-34 rust protection agent spray paint protective film
70-34 rust protection agent technical parameters
Use range
Vehicles, trucks, engineering vehicles, other machinery and equipment of the anti-corrosion maintenance;
A variety of metal structures on-site anti-corrosion maintenance;
Ship, rail industry, anti-corrosion maintenance.
Instructions
Before brushing, the need to remove the surface of the dust, oil, grease, wax, silicon and other dirt; can be used in the corrosion of the metal surface, need to remove the rust can be (st2 rust level).
Precautions
For outdoor use, you need another brush finish to prevent the coating from aging.
All coatings can be used as topcoats, overcoats, and are recommended for trial compatibility, especially coatings with high solvent content or aggressive solvents.
-
Metaflux 70-40 zinc thermal lead polishing Zinc paste
product manual:
Gray epoxy, suitable for long-term protection of metal surfaces. Manufactured in accordance with European specifications DIN50.976 / 1980. Zinc powder purity of 98.5% to 99%, surface dry zinc content of 96%. Can be reliably adhered to all metal surface .20 ℃ after 10 minutes after the hand touch, the full curing time of 80 ℃ for 24 hours; outer drying time of 20 ℃ 60 to 120 minutes. Dry after the cracks will not produce a brushing thickness of 150μm. Dry after dull and dull, can withstand temperature 800 ℃, dry after the excellent conductivity.
