Nichimoly DM-523X It is a fast drying and durable resin lubricant
It is a fast drying and durable resin lubricant, which hardly affects any plastic. Because it is liquid, it can be simply coated by brushing, dipping, etc.
The formed semi-dry coating will never be worse than grease in lubricity and durability. Use special solvent, environmental protection
- 描述
- Global Tab
描述
It hardly affects any resin or rubber. Under the condition of-50 C to 200°C, the temperature characteristic is also excellent, which can be used without problems.
It has excellent electrical insulation and thermal conductivity, very low surface tension and excellent permeability. As the special solvent, the solvent considering the earth’s environment is used.
Lubrication of gears, cams and sliding parts of ABS, PC·PS·POM, etc.
Prevent friction between resin and rubber parts and prevent pitch
Lubrication of oil, grease and other places that don’t like oil
相关产品
-
Araldite AV138/HV998 glue two component epoxy AB structure gemstone sealing glue
Method of use
1. Pretreatment: It is recommended to use acetone or isopropyl alcohol (for plastics) to clean the adhesive surface to remove oil stains, stains and dust.Araldite AV138M/HV998 cannot be used with low alcohol, gasoline or paint thinner.Mechanically sanded or chemically cleaned surfaces provide stronger, more durable bonds.
2. Sizing: This product can be evenly coated on the pretreated surface to be bonded with a spatula.AralditeAV138M/HV998 usually 0.05-0.10mm thick adhesive layer can be the maximum lap shear strength of the bond.Bonded parts should be fully and clamped immediately after applying adhesive.
-
LO-TECH 7102 Epoxy resin GLUE
To be potted products need to keep dry, clean; use check the A agent, observe whether there is settlement, and A agent to stir evenly; according to the ratio of the amount, and weighing accurate, please remember that the ratio is the weight ratio Non-volume ratio, A, B mixture after the need to fully stir evenly to avoid curing is not complete; stir even after the timely filling, and as far as possible in the use of time to use fully mixed glue; Gradually penetrate into the product gap, if necessary, please carry out the second filling; curing process, please keep the environment clean, so that impurities or dust into the uncured glue surface.
-
PATTEX PXL
Suitable for paste wood, metal, rubber, leather, fabric and other materials. Especially paste plywood, fibreboard, planing
Decorative panels (fire board), aluminum composite panels, glass fiberboard, plexiglass, hard plastic,
Rubber blocks. Wood: part of the plastic products before the proposed cohesion sticky. Not suitable for pasting polystyrene, plastic
Ethylene, polyethylene, polypropylene, mirrors and some artificial leather.
-
Loctite 3201 Light Cure Adhesive
Loctite® 3201™ is a nonfluorescing, high viscosity, UV/Visible light cure adhesive that forms very flexible joints with minimal streLoctite® 3201™ is a nonfluorescing, high viscosity, UV/Visible light cure adhesive that forms very flexible joints with minimal stress cracking. Ideal for bonding polycarbonate and other thermoplastics. ISO-10993 Biological Tested for medical device use.ss cracking. Ideal for bonding polycarbonate and other thermoplastics. ISO-10993 Biological Tested for medical device use.
-
Sankol 5005Z fast-drying lubricant for metals and plastics
Sankol 5005Z is fast-drying lubricant which includes fluorocarbon type inert solvent, developed for use in Electronic devices . office appliance equipments , optical equipments .this product is not compatible with not only metals but also most plastics.
