Nolato Compatherm Pad 9420 cost effective thermally conductive interface material.
Compatherm Pad 9420 is a cost effective thermally conductive interface material.
The material is a filled thermally conductive elastomer which provides good thermal
performance with great reliability.
Compatherm pad 9420 key properties
− 2 W/(mK) thermal conductivity
− Operating temperature -40 to +150˚ C
− Electrically insulating material
− Compliant elastomeric based material
− Naturally tacky on both sides, customised surface available
− Available in thickness from 0.25 to 5mm
- 描述
- Global Tab
描述
Thickness tolerances are ± 0,1 mm on pads thinner than 1 mm and ± 10% on pads
thicker than 1 mm.
XY tolerance is ± 1mm on standard sizes. The tolerances on custom made pads
varies please consult the Nolato marketing department.
It is recommended to use the material in up to 20%-30% of compression degree. A
compression degree of 50% is possible to use but above that level is a thinner pad
recommended.
相关产品
-
Compatherm 9343 is a two part thermal filler from Nolato.
Features and benefits
Nolato integrated dispensing head solution.
4 W/mK thermal conductivity
Operating temperature -40 to +150˚ C
Ultra conforming before curing
Addition curing at room temperature
Very good wetting.
Two part material gives high mechanical stability after
curing -
Silicone Foam TapeOur JB 9000 foam tape, provides a low density, light weight, silicone foam
Our JB 9000 foam tape, provides a low density, light
weight, silicone foam. Having low compression
set characteristics, high heat capability, low
outgassing ability, and FDA suitability, this
product is ideal for many specialized applications. -
Nolato 8650 is a material used for moulded components.
The material is a one component, peroxide cured silicone system.
Nolato 8650 is a material used for moulded components.
Nolato 8650 key properties
– Operating temperatures are between –55°C and +125°C.
– Silicone rubber can easily stand heat, cold, moisture, UV, ozone and
pressure over long times.
– In environmental tests this material has proved none or only slights
deterioration of conductivity and shielding effect. -
Compatherm filler 9344 thermally conductive two-part addition cured compound from Nolato.
Compatherm filler key properties 9344
− 4 W/(mK) thermal conductivity
− Operating temperature -40 to +150˚ C
− Ultra-conforming
− Very good wetting
− Two-part material gives high mechanical stability after curing
1. Applications
The product is used to transfer heat from heat sources, such as components on a
PCB, to a heat sink. Compatherm filler 9344 has the ability to cover various gap
heights and complex geometries with a very low closure force. -
Nolato Series 1130 Fluorosilicone Rubber Sheets
TYPICAL INDUSTRIES UTILIZING
FLUOROSILICONE RUBBER
• Aircraft, Military and Commercial Aviation
• Petrochemical and Oil Refining Industries
• Electronics
