METAFLUX 70-78
Specifications: 400ml / support
1. Very high stainless steel content
2. High alloy stainless steel particles and weather resistant synthetic resin to form a good stainless steel corrosion
3. Color: stainless steel, chrome: 18%, nickel: 8%, manganese: 2%
4. Maximum heat-resistant temperature: 300 ℃ Application: applicable to all metals, wood, glass, ceramics and most of the plastic
5. Metaflux 70-78 stainless steel spray has excellent stainless steel coating
6. Good weather resistance, with anti-corrosion ability
7. Anti-wear
8. Quick dry, dry for 5 minutes
Bitzer frozen oil BSE170 refrigeration compressor oil
Bitzer refrigeration oil replacement conditions:
1, the unit for a long time to work, the compressor has reached the maintenance time (the initial operation of the unit 2000 hours, after the cumulative three years or running time more than 10000 ~ 12000 hours);
2, because the motor burned and replace the compressor; replace the compressor after 100 hours of continuous operation of the fluorine system;
3, for the scene assembled units or close to the working conditions of the unit under the limit, in the cumulative operation of 100 hours after the replacement of frozen oil;
PATTEX PXT4X-1
Suitable for paste wood, metal, rubber, leather, fabric and other materials. Especially paste plywood, fibreboard, planing
Decorative panels (fire board), aluminum composite panels, glass fiberboard, plexiglass, hard plastic,
Rubber blocks. Wood: part of the plastic products before the proposed cohesion sticky. Not suitable for pasting polystyrene, plastic
Ethylene, polyethylene, polypropylene, mirrors and some artificial leather.
Araldite AV138/HV998 glue two component epoxy AB structure gemstone sealing glue
Method of use
1. Pretreatment: It is recommended to use acetone or isopropyl alcohol (for plastics) to clean the adhesive surface to remove oil stains, stains and dust.Araldite AV138M/HV998 cannot be used with low alcohol, gasoline or paint thinner.Mechanically sanded or chemically cleaned surfaces provide stronger, more durable bonds.
2. Sizing: This product can be evenly coated on the pretreated surface to be bonded with a spatula.AralditeAV138M/HV998 usually 0.05-0.10mm thick adhesive layer can be the maximum lap shear strength of the bond.Bonded parts should be fully and clamped immediately after applying adhesive.
pattex cg80
Construction temperature should be +7 ℃ to +35 ℃.
This product does not need to add water.
Do not mix this product with other materials or additives.
Cold area or low temperature conditions, please note that the product of antifreeze storage.
This product contains cement, water will produce alkaline reaction, so please protect the skin and eyes,
In case of contact please wash with water; in case of eye contact please seek medical attention.