-
DOW CORNING PV 7326 Potting Agent
Potting of solar module junction boxes
Two-part, 6:1 (by weight) mix ratio silicone elastomer supplied as flowable liquid
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
-
DOW CORNING PV 7326 Potting Agent
Potting of solar module junction boxes
Two-part, 6:1 (by weight) mix ratio silicone elastomer supplied as flowable liquid
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
-
Dow corning PV8101F solar energy adhesive sealant
One-part, fast tack-free, silicone RTV for PV module assembly. Typical applications include bonding and sealing photovoltaic module frames and electrical junction boxes.
-
Dow Corning TC-5351 automotive heating assembly heat dissipation does not flow thermal grease
Product color Gray
Operating temperature -50°C to 200°C
Thermal conductivity 3.3W/m.K
The product specification is 1KG
The warranty date is 12 months
-
DOW Dow Corning DC 527 two-component electronic equipment sealant potting sealant silicone conductive adhesive
A two-component
Curing characteristics Heating curing <100C long working time >15 minutes, room temperature extended working time >20 minutes
Curing type added curing
Cure at room temperature for 30 minutes -4 hours
Display/Optical product group sealant/gel -
DOWCORING 1-2577 hot melt adhesive
Dow corning DC1-2577 conformal coating is a kind of transparent silicone resin, has good high frequency and low frequency dielectric properties, compared with the previous common silicone resin has better thermal shock resistance.
-
Dowcoring 3165 high quality adhesive
and sealing housings, modules, and electrical leads. It is non-flowing, tack free, flame resistant, and has good green strength. 305 mL Cartridge
-
Dowcoring 737 silicon RTV adhesive
• Substitute for mechanical fasteners on large and small appliances
• Sealing refrigerator and freezer liners
• Adhering plastic moldings to plastic substrates for trim applications, decals
• Waterproofing electrical components
• Sealing coaxial connectors
• Protecting instrumentation assemblies -
DOWSIL 1-2577 Conformal Coating One-part, transparent medium viscosity conformal coating with firm, abrasion resistant surface after cure.
- Cures to a tough, elastoplastic, resilient, abrasion resistant surface
- One-part Solvent-borne resin coating
- Room temperature cure, no ovens required
- Optional mild heat acceleration (after solvent flash-off) can speed in-line processing
- UV indicator allows for automated inspection
- UL 94 V-0 flammability rating
- UL 746E / UL746C Recognized
- IPC-CC-830, Amendment 1 Approved
- Mil-I-46058C, Amendment 7 Approved
- Good adhesion allows use with many low-solids (no clean) and no-lead solders
-
DOWSIL 1-2620 Low VOC Conformal Coating version is supplied with a lower VOC content compared to that of the DOWSIL 1-2620 Dispersion and has equivalent Mil spec, IPC-CC-830 and UL recognitions.
RTV elastoplastic conformal coatings have firm, dry surfaces for better handling and
abrasion resistance after cure. Various viscosity versions facilitate different application
methods. They require atmospheric moisture to cure (no ovens) and their cure rates can be
accelerated by mild heat. Conformal coatings are materials applied in thin layers onto
printed circuits boards or other PCB system assembly substrates -
DOWSIL 1-4105 Conformal Coating is suitable for use as a protective coating for rigid and flexible circuit boards
Solventless heat cure conformal
coatings are designed for rapid
processing at low temperatures
(below 125°C). They require some
heating to cure, offering long bath at
room temperature. Like the roomtemperature-curing
elastomers, these
products offer optimum stress relief -
DOWSIL 1200 OS Primer enhances bonding/adhesion of RTV and heat cure silicones
Users should determine the best technique for their applications. For especially difficult-tobond-to
surfaces, it may be necessary to increase the surface reactivity by chemical
etchants or oxidizers, or by exposing the surface to UV, corona, plasma or flame sources.
Allow solvents to completely evaporate before applying the primer