Shop

  • DOWSIL CN-8880 white thermal conductive silicone computer CPU graphics card heat dissipation paste thermal conductive silicone

    Dow thermally conductive compounds are grease like silicone materials, heavily filled with heat-conductive metal oxides. This combination promotes high thermal conductivity, low
    bleed and high-temperature stability. The compounds are designed to maintain a positive heat sink seal to improve heat transfer from the electrical device or PCB system assemblies
    to the heat sink or chassis, thereby increasing the overall efficiency of the device. or PCB  system assemblies are continually designed to deliver higher performance. Especially in the area of consumer devices, there is also a continual trend towards smaller, more compact designs. In combination these factors typically mean that more heat is generated in the device. Thermal management of PCB system assemblies is a primary concern of design engineers. A cooler device allows for more efficient operation and better  reliability over the life of the device. As such, thermally conductive compounds play an integral role here. Thermally conductive materials act as a thermal “bridge” to remove heat  from a heat source (device) to the ambient via a heat transfer media (i.e. heat sink). These materials have properties such as low thermal resistance, high thermal conductivity, and can achieve thin Bond Line Thicknesses (BLTs) which can help to improve the transfer of heat away from the device.

  • DOWSIL Corning 3-6265 adhesive fixed sealant black resin sealant fast thermosetting

    One piece, black, heat cured, high strength, self priming, non-flow version 3-6265 with UV indicator. Suitable for automotive and industrial assembly applications, including seal covers and enclosures, joint bottom gaskets and connector seals

  • DOWSIL Corning CN-8760G heat conduction potting adhesive power supply sealant electronic polyurethane adhesive heat dissipating adhesive

    Typical characteristic
    Curing characteristics: heat curing >100C, extended working time >20 minutes at room temperature
    Characteristic: Mild thermal conductivity, UL approved
    Special properties: Heat conduction, UL certification
    Durometer/Hardness: Medium hardness 20A-50A
    Viscosity/flow: Control flow 3000-10,000 cps
    Two parts
    Room temperature curing: >24 hours

  • Dowsil corNING SC102 ELECTRONIC IC chip thermal grease heat sink

    A white, non – cured, non – flowing, heat – conducting compound. Designed to provide efficient heat transfer for cooling of computer power supplies and electronic modules used in automotive applications

  • DOWSIL DC567 silicone flame retardant Potting adhesive electronic and electrical bottomless coating self adhesive type

    Product features:

    Strong bottomless coating adhesive relay
    No solvent, no curing byproducts
    Low viscosity, suitable for dipping
    non-exothermic
    Solidify into an elastomer
    Long application period (less than 4 days at room temperature)
    Good dielectric property
    Wide range of temperature resistance
    Product advantages:

    Strong adhesion to a variety of substrates, without bottom coating
    Does not corrode or damage sensitive components
    It can slow down mechanical shock and thermal cycle stress and is easy to repair
    Meet the requirements of electrical insulation
    It is stable and elastic at -55-200℃
    Physical form: curing: low viscosity fluid curing: elastic rubber
    Storage temperature: 0-35 degrees Celsius

  • DOWSIL EA 9189 H  fast tack free, flowable silicone adhesive with controlled volatility and good flame resistance.

    Typical Properties

    • ColorWhite
    • Cure CharacteristicsRoom Temperature Fast Tack-Free < 10 min
    • Dielectric Constant at 100 Hz3.2
    • Dielectric Constant at 100 kHz2.7
    • Dielectric Strength20 kV/mm
    • Dissipation Factor at 100 Hz0.08
    • Elongation50 %
    • Non-SlumpYes, Yes
  • DOWSIL OS-20 Odorless environmental protection thinner Insulation coating three – resistant paint

    Brand: Dow Corning
    Model: OS – 20
    Origin: USA
    Specification: 15 kg
    Shelf life :24 months
    Curing speed: full solid 24 hours
    Curing type: self-drying type

  • DRY Lube with Teflon fluoropolymer

    Finish Line’s Dry Lube goes on wet and sets up with a dry ‘wax-like’ synthetic film that helps keep your chain clean by not absorbing excessive amounts grit, grime, or dust. Thanks to the added Teflon™ fluoropolymer, Finish Line’s Dry Lube minimizes pedaling friction, repels moisture, and withstands rides up to 100 miles. An extremely versatile lubricant and a perfect choice for many road and off-road cyclist

  • DRYSURF A-2264EL Quick-drying lubricant that dries instantly after application

    Compared to grease, the product causes little running or staining, and is optimally used to increase lubricity or prevent noise on surfaces where grease cannot be applied. As it may be applied in thin layer, viscosity resistance can be kept low in precision sliding areas.

  • DRYSURF Havis MDF-2400EL Dry Lubricant skin film oil metal plastic rubber to prevent wear

    The Vis DRYSURF MDF series are fast drying lubricants which include fluorine inert solvents and are used in developed countries for electronic equipment, office supplies equipment and optical equipment. The product is compatible not only with metals but also with most plastics.
    Characteristics of the
    1. Can be used for any mechanical parts;
    2 can be dried in a few seconds at room temperature;
    3. Operating temperature range from -50 to 350℃;
    4 Matches metal and most plastics.
    application
    Long – acting lubrication can prevent gear and CAM wear.

  • DRYSURF HLV-60 Base Oil germany lubricant oil

    Widely used in audio and video equipment and other products need clean and lubricated precision parts, such as CD-ROM discs slide, cameras, digital cameras, optical instruments telescopic lens and internal lubrication.

  • Dymax 3-20796 UV curing Polyurethane resin glue

    Typical application flexibility, strong, medium viscosity, adhesive application range is wide, including plastic assembly and potting