-
LOCTITE 3611 Surface Adhesive SMT Red adhesive one component epoxy resin fast curing low moisture absorption
Method of use
1. In order to maintain the quality of the patch glue, please store it in the refrigerator (2±10C).
2. It should be kept at room temperature for 2^3 hours before it is removed from the refrigerator.
3. Add the back plug to the dispensing hose to obtain a more stable dispensing amount.
4 recommended dispensing temperature is 30-35℃.
5 can use toluene or ethyl acetate to clean the hose.
-
Loctite 3619 epoxy patch adhesive heat sensitive element patch red adhesive low temperature curing surface patch adhesive
LOCTITE 3619 is designed for bonding of surface mounted
devices to printed circuit boards prior to wave soldering.
Particularly suited where low curing temperatures are
required with heat sensitive components, and in applications
where short curing times are required. -
LOCTITE 380 High Strength Low Whitening Instant Glue Acrylic quick Drying adhesive
Brand: LOCTITE
Model: 380
Origin: China
Specification: 30 g
Shelf life :24 months
Curing speed: full setting 24 hours
Curing category: natural air drying
Application: Metal, plastic, rubber silicone, PVCABS bonding -
LOCTITE 382 Instant glue Adhesive seal metal rubber transparent quick drying glue universal gel
Brand :LOCTITE/ LOCTITE
Model :382 [Specification] : 20G [Origin] : China
Features: colorless, transparent, fast curing, low odor, low whitening
Applications: specially formulated for electronic applications, typical applications include wire clamp in coil form; Tamper-proof adjustable component; Install brackets, edge guides and stiffeners for the circuit board. -
Loctite 383 grey one component thermal conductive adhesive for bonding printed circuit boards and radiators
Brand: LOCTITE
Model: 383
Specification: 25 ml
Origin: China
Curing time: full curing 24 hours
Component: single component
Product Type: Heat conductive adhesive
Uses: Heat dissipation and components for electronic appliances -
LOCTITE 401 designed for the assembly of difficultto-bond materials which require uniform stress distribution and strong tension and/or shear strength.
LOCTITE 401 designed for the assembly of difficultto-bond
materials which require uniform stress distribution and
strong tension and/or shear strength. The product provides
rapid bonding of a wide range of materials, including metals,
plastics and elastomers. LOCTITE 401 is also suited for
bonding porous materials such as wood, paper, leather and fabric. -
Loctite 403 Low odour and low bloom alkoxyethyl instant adhesive.
LOCTITE 403 is a medium viscosity, low odour, low blooming alkoxyethyl-based product is particularly suitable for applications where vapour control is difficult. It provides rapid bonding of a wide range of materials, including metals, plastics and elastomers. It is particularly suitable for bonding porous or absorbent materials.
-
LOCTITE 406 designed for bonding of plastics and elastomeric materials where very fast fixturing is required
Cure Speed vs. Humidity
The rate of cure will depend on the ambient relative
humidity. The best results are achieved when the relative
humidity in the working environment is 40% to 60% at 22°C.
Lower humidity leads to slower cure. Higher humidity
accelerates it, but may impair the final strength of the bond. -
Loctite 406 surface not sensitive Instant glue universal
406 instant glue
The surface is not sensitive
Universal type, medium viscosity. Used for bonding porous, acid and absorptive materials.
Main adhesive backing material: leather metal expect rubber wood paper, etc.
Color: colorless to straw color
Type: ethyl
Viscosity: 15/25
Curing speed: solid 10 seconds at the beginning of all 24 hours
Strong shear strength: 10/20
Relative density: 1.1 -
Loctite 407 quick-drying glue 50 grams of packaging
LOCTITE 407 is a universal type adhesive is especially suitable for used for refractory material.
Before solidification material properties
The proportion of @ 25 ° C 1, 05
Cone and Plate measuring instrument, :
Temperature: 25 ° C, shear rate: 3, 000 s -
Loctite 408 low odor no whitening instant adhesive quick curing instant adhesive
Loctite 408 Instant dry adhesive application scope:
Loctite 408 instant dry adhesive bonding metal plastic rubber leather wood glass ceramic and other materials
Loctite 408 Instant dry adhesive Typical use:
Loctite 408 INSTANT DRY ADHESIVE is suitable for rapid bonding of most metal, plastic or elastic materials, especially for bonding porous, acidic and absorbent materials. Examples: wood, paper, leather, or fabric. Low odor, low whitening, especially suitable for poor ventilation, high appearance requirements of the occasion.
-
LOCTITE 412 Low whitening Low odor fast setting acrylic instant Dry glue
Brand: LOCTITE
Model: 412
Color: Colorless and transparent
Specification: 20 g
Type: Ethyl
Curing speed: full setting 24 hours
Application: Mainly used in the electronic field of bonding metal, plastic, etc