-
Series 1140 Fluorosilicone Continuous Sheeting
Typical Industry Utilization
• Aircraft, Military & Commercial Aviation
• Petrochemical & Oil Refining
• Electronics -
Shadowless traceless fast dry glass UV curable glue
Item Parameter Appearance Light Amber to Colorless and Transparent Liquid Fixing time 10s Curing tool UV lamp/UV light Curing condition 365 nm Temperature Endurance 40-120℃ Multi-Part Adhesive One-Part -
Shin-Etsu G-746 thermal grease
Shin-Etsu G-746 thermal grease is widely used as the thermal conductivity of materials for electronic components, such as the processor CPU and heat sink, caulking, power transistor, thyristor diode materials (copper, aluminum) contact with the filling of gaps, transistor; CPU assembly; temperature sensor; automotive electronics; car refrigerator; power supply module; printer head, electronic appliances, the sound of crystal cooling use, reduce the operating temperature of the heating element, an increase of crystal life.
-
ShinEtsu G-501 Silicone Grease
Shin-Etsu G-501 grease by special silicone oil as a base oil, add the special wear-resistant, anti-oxidation additives refined, it applies to plastic parts, blower bearings, lubrication and silencers. The ratio between the lubricated components (such as: Polyacetal POM, polycarbonate PC, ABS and other resins) will not form cracks. Shin-Etsu G-501 grease lubrication between metal far more than the general lubricating effect of the silicone oil.
-
ShinEtsu g-747 kind of grease like thermal conductive silicone grease
It is a kind of synthetic oil based on silicone oil and mixed with certain metal oxides. It has good current characteristics and is most suitable for heat dissipation and insulation of semiconductor components such as transistors, thermoelectric resistors and various heat conduction media.
Technical parameters:
Product Name: Xinyue g-747 thermal grease
Appearance: white greasy
Specific gravity: 2.70
Concentration: 346
Oil separation: 0.01 * 2
Volatilization rate: 0.02 * 2
Thermal conductivity: 1.09 {2.6×10-3}
Operating temperature range: – 50 – + 170
-
shinetsu KE 44 silicone thermal grease
ShinEtsu KE-44 Mainly used in electronic components of the heat transfer medium, can enhance their work efficiency. Such as: high-power transistors (especially the plastic tube), SCR components, thermostat contacts between the diode and the substrate (aluminum, copper) contacts the heat transfer medium gap Department, rectifiers, radiator and electrical the thermal conductivity of insulating materials.
-
ShinEtsu KR-400 liquid silicone Coating agent
Due to the degree of aging caused by ultraviolet light, good weather resistance. Coating yellow, powder, luster disappeared and so on, can be a long time to maintain the stability of the coating characteristics.
-
ShinEtsu KR-400 Organic Silicone
product characteristics
The KR-400 silicone resin is a demethoxylated methyl type silicone coating agent containing a curing catalyst. At room temperature, about 1 hour can be dry, can be cured for several hours, with excellent weather resistance, rust, water, water, adhesion, chemical resistance
Character, heat resistance, the formation of relatively hard surface film. -
ShinEtsu Silicone Grease High Vacuum Sealing Compound (200ºC) G-40M
The Shin-Etsu grease is applied into the Sanwa joystick body and under the Sanwa JLF-P-4 Pivot Cylinder. The grease lubricates the cylinder, which in turn allows the joystick to move more freely.
-
Silicone Foam TapeOur JB 9000 foam tape, provides a low density, light weight, silicone foam
Our JB 9000 foam tape, provides a low density, light
weight, silicone foam. Having low compression
set characteristics, high heat capability, low
outgassing ability, and FDA suitability, this
product is ideal for many specialized applications. -
Sony SC 901
SONY SC901 is a self extinguishing glue adhesive of high performance non corrosion speed dry. When hardening, it has little odor, and it has excellent electrical characteristics and weather resistance after hardening. Suitable for electronic, electrical sealing, stationary, shock proof, thermal conduction.
Temperature resistance: -50°C~250°c -
SONY SC-121 glue
SC121 is the neoprene as main ingredients, has passed the UL specifications (94 v – 0) certification of high-performance self-extinguishing adhesives. To room temperature, heating contact type, as long as the tiny pressure, can play a strong cohesive force.
