-
DOW Corning 1-2577LV glue PCB board moisture-proof insulation coated with glue three anti paint 15kg bucket
Brand: Dow Corning
Model: 1-2577 – lv
Origin: United States
Specification: 15 kg
Shelf life :24
Curing speed: full setting 24 hours
Curing type: self-drying type
Application: Used for PCB board covering insulation and moisture-proof -
Dow Corning 1-2620 general purpose silicone sealant
performance: waterproof, moisture, dust, Anti-corrosion, anti-aging, and other characteristics, widely used in circuit boards, electronic equipment, insulation protective adhesive, electronic components, electronic scales, electronic passive parts, automotive electronic control, etc.; )
-
DOW CORNING 1-4105 adhesive
Dow Corning 1-4105 Low viscosity, low temperature fast curing, heat curing, transparent coating single component, solvent-free elastomer, fast heating curing, transparent, resistant to moisture and other harsh environmental effects; good dielectric properties.
-
DOW CORNING 1-4105 adhesive curingeps raw Coating material
Dow Corning 1-4105 Conformal Coating Low viscosity, low temperature fast curing, heat curing, transparent coating single component, solvent-free elastomer, fast heating curing, transparent, resistant to moisture and other harsh environments; good dielectric properties.
-
Dow corning 1200 OS epoxy primer paint
Instructions
1. Clean the dust, dirt, tar, oil traces and other debris on the left and right surfaces thoroughly. Use abrasive cleaning agents or metal brushes to remove rust and scale from metal surfaces. Stone surface with a metal brush or with compressed air to remove dust.
2. Clean the surface with a clean, degreased surface with a rag with an industrial solvent similar to IPA (acetone), naphtha, vegetable oil, xylene, toluene or MEK.
For rough or porous substrate surfaces, the recommended coverage is about 400 ft2 / gal (9.8 m2 / L). On flat metal surfaces, coverage may reach 800 square feet per gallon (19.6 square meters / L).
4. Allow the primer to dry for at least 15 minutes. Precise time should be based on the outside world
Temperature, humidity and porosity of the substrate.
5. Direct use of silicone glaze material or building sealant. -
dow corning 3145 High-quality components fixed glue
High strength: fully cured after the tensile and tear strength, and has good resistance to moisture, anti-corona, anti-ozone performance.
No collapse: high viscosity, no sag after coating, no collapse after curing. -
DOW CORNING 3145 RTV Adheisve silicone sealant
Dow corning 3145 RTVconformal coating (contains ultraviolet ray tracer).SGS certification Dow corning3145 RTV main use of rigid and flexible printed circuit board protection coating and impregnation of porous substrate protection coating.
-
DOW CORNING 3145 RTV silicone sealant glue
MIL-A-46146 Group II tested APPLICATIONS Dow Corning® 3145 RTV MIL-A-46146 Adhesive Sealant – Clear is suitable for: Sealing openings in modules and housings , Assembly of components on printed wiring board (PWB) ,Sealing in and around wired and electrical leads TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
-
DOW CORNING CN-8760 AB epoxy glue
Two-part, 1 to 1 Gray Silicone Elastomer, RT and heat cure for manufacturing flexibility, harder elastomer with moderate thermal conductivity
-
Dow Corning DC186 optical glue Dow Corning 186 PDMS module glue potting glue silicone rubber glue
【 Product Features 】
High viscosity: close to paste viscosity, no vertical flow.
Low stress protection: SOLIDIfy into elastomer, protect components from damage in harsh environments such as mechanical vibration and cold and heat cycling.
No corrosion: addition reaction system, no by-products produced in the reaction process, no change in volume, more environmentally friendly.
Transparent: optically transparent. Can be applied to the requirements of transparency, or is the occasion of low optical requirements easy demoulding: smooth surface, low surface energy, easy demoulding. Flame retardant performance: through UL94-V1 flame retardant certification. -
Dow Corning EA-4900 Electronic components fixed sealant sealant clear/gray silicone sealant
- DOWSIL™ EA-4900 White RTV Adhesive is suitable for sealing of equipment and modules on circuit boards
-
Dow Corning EE1100AB two-component low viscosity primer potting sealant
Product features
EE1000 is a two-component, room temperature curing silicone elastomer; No special design required
