a very fast curing speed
Especially suitable for bonding a variety of materials, such as metals, plastics, elastomers, such as pieces of paper, leather
Even under the harsh environment can rapid solidification
Cure time: 20-30 seconds
Cure Speed vs. Activator
Where cure speed is unacceptably long due to large gaps,
applying activator to the surface will improve cure speed.
However, this can reduce ultimate strength of the bond and
therefore testing is recommended to confirm effect
Loctite 498 super bonder
Medium viscosity, high temperature resistant products. Applicable to all metals and the vast majority of plastic and rubber. Temperature tolerance range is 106 degrees 121 degrees continuous or intermittent.
Packing: 20 grams of yantai imported 500 grams of yantai 1 oz
LOCTITE 609 is tested to the lot requirements of Military
Specification Mil-R-46082B. Note: This is a regional approval.
Please contact your local Technical Service Center for more
information and clarification.
Cure Speed vs. Substrate
The rate of cure will depend on the substrate used. The graph
below shows the shear strength developed with time on steel
pins and collars compared to different materials and tested
according to ISO 10123.
LOCTITE 620 is designed for the bonding of cylindrical fitting
parts, particularly where bond gaps can approach 0.2 mm and
where maximum strength at room temperature is required. The
product cures when confined in the absence of air between
close fitting metal surfaces and prevents loosening and
leakage from shock and vibration
Loctite638 cylindrical solid glue, henkel loctite 638 glue, anaerobic adhesive, is a kind of single component, high strength, high viscosity, anaerobic retaining adhesives, in the case of isolated from the rest of the air, this product in two close coordination between the metal surface of rapidly solidified high strength.
Typical application: used for bonding cylindrical mating parts, especially suitable for bonding gap of approximately 0.381 mm parts and requirements under the condition of room temperature has a great strength. Typical applications include bush and sleeve is fixed to the frame or shaft.
LOCTITE 638 is designed for the bonding of cylindrical
fitting parts, particularly where bond gaps can approach 0.25
mm and where maximum strength at room temperature is
requiredThe product cures when confined in the absence of air
between close fitting metal surfaces and prevents loosening
and leakage from shock and vibrationTypical applications
include locking bushings and sleeves into housings and on shaftsL