680 glue loctite 680 cylindrical solid glue
LOCTITE680_ loctite 680 cylindrical rubber are _ “high strength”
LOCTITE henkel LOCTITE 680 glue, LOCTITE 680 cylindrical solid glue, high strength, viscosity, suitable for clearance fit or interference fit, retaining sleeve, pulley, gear, rotor, repair the hole, shaft mating parts, super bad parts, in 10 minutes early curing, of steel in 24 hours to provide greater than 20.7 N/mm. Shear strength and the maximum radial fill the gap of 0.25 mm. Anaerobic type glue, are used for solid cylindrical mating parts. In the case of cut off from the air, this product in two close coordination between the metal surface of curing.
- 描述
- Global Tab
描述
LOCTITE680_ loctite 680 cylindrical rubber are _ “high strength”
LOCTITE henkel LOCTITE 680 glue, LOCTITE 680 cylindrical solid glue, high strength, viscosity, suitable for clearance fit or interference fit, retaining sleeve, pulley, gear, rotor, repair the hole, shaft mating parts, super bad parts, in 10 minutes early curing, of steel in 24 hours to provide greater than 20.7 N/mm. Shear strength and the maximum radial fill the gap of 0.25 mm. Anaerobic type glue, are used for solid cylindrical mating parts. In the case of cut off from the air, this product in two close coordination between the metal surface of curing.
Typical use: high intensity
Color: green,
The biggest gap filling: 0.381 mm
Viscosity (mPa) s) : 750/1750
Temperature: 150 ℃ heat resistance
The curing speed (solid) : 10 minutes / 24 hours
Recommend a promoter: 7649/7471
Get free sample or more information , please contact me with my email: jenny@fuji-hk.cn . thank you .
相关产品
-
LOCTITE 272 designed for the permanent locking and sealing of threaded fasteners.
Loctite 272 is a single component, high temperature resistant, high strength, anaerobic thread locking adhesive. The product cures between two tightly fitting metal surfaces in an air – free environment. High temperature resistance up to 230℃, can be used for cylinder head double screw lock, need heating and use tools when disassembling.
LOCTITE 272 is designed for permanent use. Long locking and sealing threaded fasteners. When held in place without air between tightly fitted metal surfaces, the product cures and prevents loosening and leakage from shock and vibration. Typical applications include locking and sealing with large bolts and studs (M25 and larger).
-
LOCTITE 480 rubber toughened adhesive with increased flexibility and peel strength along with enhanced resistance to shock.
LOCTITE 480 is a rubber toughened adhesive with
increased flexibility and peel strength along with enhanced
resistance to shock. -
LOCTITE 510 cures when confined in the absence of air between close fitting metal surfaces
NSF International Registered to NSF Category P1 for use as a sealant where
there is no possibilty of food contact in and around food
processing areas. Note: This is a regional approval. Please
contact your local Technical Service Center for more
information and clarification. -
LOCTITE SF 7452 increased cure speed of LOCTITE cyanoacrylate adhesives
- Cures excess adhesive
- Provides excellent cosmetic appearance avoiding the white discoloration of instant adhesives
- Not recommended on plastics prone to stress cracking
-
Henkel LOCTITE 460 Instant adhesive Low bleaching low odor quick drying adhesive Metal plastic rubber universal
The rate of cure will depend on the ambient relative
humidity. The best results are achieved when the relative
humidity in the working environment is 40% to 60% at 22°C.
Lower humidity leads to slower cure. Higher humidity
accelerates it, but may impair the final strength of the bond.
