Araldite epoxy adhesive AB glue Glue Adhesive Silicone
Araldite 2011 epoxy adhesive
Materials and RongTie fund and aluminum, copper, zinc and metal plating, polyamide/polyurethane foam, polystyrene foam, ceramic, Lin Cai
Cure time 10 hours
The color yellow, impact resistance
Shear strength of 19 N/mm
Package type double cylind
- 描述
- Global Tab
描述
Araldite 2011 epoxy adhesive
Materials and RongTie fund and aluminum, copper, zinc and metal plating, polyamide/polyurethane foam, polystyrene foam, ceramic, Lin Cai
Cure time 10 hours
The color yellow, impact resistance
Shear strength of 19 N/mm
Package type double cylind
Get free sample or more information , please contact me with my email: jenny@fuji-hk.cn . thank you .
相关产品
-
Araldite 2018 Adhesive epoxy resin
1. Package: 200ml/set.
2. Shipping: by air/ship.
3. Express: DHL,TNT, Fedex,EMS,etc.
4.Delivery: within 3 days after receiving the payments.
Key properties
• Multi purpose
• Long working life
• Low shrinkage
• Good resistance to dynamic loading
•Bonds a wide variety of materials in common use
-
Araldite AV138/HV998
Araldite Aloe AV138M / HV998 is a versatile, two-component epoxy resin adhesive, A glue: AV138M, B glue: HV998; a paste in the room temperature curing or curing at room temperature epoxy resin AB adhesive strength High, good toughness, low volatility, the ability of 120 ℃ high temperature, can be cured at 5 ℃. When fully cured, the adhesive has excellent high temperature resistance and high corrosion resistance. It is suitable for bonding all kinds of metals, ceramics, glass, rubber, hard plastic and most commonly used materials, and can be widely used in industries resistant to harsh environmental requirements. Because of its low volatility, it is suitable for the special electronic communications industry and the aviation industry.
-
ARALDITE 2020 two component, room temperature curing, low viscosity adhesive specifically designed for glass bonding.
Araldite®
2020
Two component clear epoxy adhesive system
Key properties • Low viscosity, water white adhesive
• Especially suitable for glass and ceramic bonding
• Suitable for clear castings and laminates
• Refractive index similar to that of glass
Description Araldite®
2020 is a two component, room temperature curing, low viscosity adhesive specifically designed for glass
bonding.
It is also suitable for bonding a wide variety of metals, ceramics, rubbers, rigid plastics and most other materials in
common use.Pretreatment
The strength and durability of a bonded joint are dependant on proper pretreatment of the surfaces to be bonded. At
the very least, joint surfaces should be cleaned with a good degreasing agent such as acetone, iso-propanol (for plastics)
or other proprietary degreasing agents in order to remove all traces of oil, grease and dirt.
Low grade alcohol, gasoline (petrol) or paint thinners should never be used.
The strongest and most durable joints are obtained by either mechanically abrading or chemically etching (“pickling”)
the degreased surfaces. Abrading should be followed by a second degreasing treatment -
Araldite AB Slow dry glue
Make sure the surfaces to be joined are clean, dry and free from grease. Roughen smooth, glossy surfaces. Squeeze out equal amounts of Resin and Hardener. Mix thoroughly and use within 5 minutes (18-24°c room temperature).
Apply mix to both joint surfaces.
Assemble parts and hold together with clamps,tape, string or weights,etc. for 10 – 15 minutes. The newly bonded joint can be handled after 3 hours and attains its full strength after about 8 hours. -
Araldite HV998 epoxy resin adhesive
Key properties：
• Multi purpose
• Long working life
• Low shrinkage
• Good resistance to dynamic loading
•Bonds a wide variety of materials in common use
