Araldite epoxy adhesive AB glue Glue Adhesive Silicone
Araldite 2011 epoxy adhesive
Materials and RongTie fund and aluminum, copper, zinc and metal plating, polyamide/polyurethane foam, polystyrene foam, ceramic, Lin Cai
Cure time 10 hours
The color yellow, impact resistance
Shear strength of 19 N/mm
Package type double cylind
PATTEX PXL
Suitable for paste wood, metal, rubber, leather, fabric and other materials. Especially paste plywood, fibreboard, planing
Decorative panels (fire board), aluminum composite panels, glass fiberboard, plexiglass, hard plastic,
Rubber blocks. Wood: part of the plastic products before the proposed cohesion sticky. Not suitable for pasting polystyrene, plastic
Ethylene, polyethylene, polypropylene, mirrors and some artificial leather.
METAFLUX 70-78
Specifications: 400ml / support
1. Very high stainless steel content
2. High alloy stainless steel particles and weather resistant synthetic resin to form a good stainless steel corrosion
3. Color: stainless steel, chrome: 18%, nickel: 8%, manganese: 2%
4. Maximum heat-resistant temperature: 300 ℃ Application: applicable to all metals, wood, glass, ceramics and most of the plastic
5. Metaflux 70-78 stainless steel spray has excellent stainless steel coating
6. Good weather resistance, with anti-corrosion ability
7. Anti-wear
8. Quick dry, dry for 5 minutes
PATTEX PX4L1
Suitable for metal, rubber, leather, fabric and other materials. Especially paste plywood, fibreboard, planing
Decorative panels (fire board), aluminum composite panels, glass fiberboard, plexiglass, hard plastic,
Rubber blocks. Wood: part of the plastic products before the proposed cohesion sticky. Not suitable for pasting polystyrene, plastic
Ethylene, polyethylene, polypropylene, mirrors and some artificial leather.
Araldite AB Slow dry glue
Make sure the surfaces to be joined are clean, dry and free from grease. Roughen smooth, glossy surfaces. Squeeze out equal amounts of Resin and Hardener. Mix thoroughly and use within 5 minutes (18-24°c room temperature).
Apply mix to both joint surfaces.
Assemble parts and hold together with clamps,tape, string or weights,etc. for 10 – 15 minutes. The newly bonded joint can be handled after 3 hours and attains its full strength after about 8 hours.