Compatherm Paste 9532 a high performance, thin bondline thermal paste from Nolato
Compatherm paste 9532 key properties
− 2.5 W/(mK) thermal conductivity
− Operating temperature -40 to +150˚ C
− Non curing
− Solvent free
− Excellent long-time stability
− Suitable for printing, stamping applications
- 描述
- Global Tab
描述
2.2.Material Properties
Test procedure Unit 9532
Base material Silicone
Colour Visual White
Specific gravity ASTM D792 g/cm3 2.68
Viscosity Brookfield T-F at
10 RPM cps 110000
Minimum achievable bond line Nolato µm 50
Dielectric breakdown voltage ASTM D149 VAC/mm 4000
Outgassing, TML 1) ASTM E595
(modified) % 0.15
相关产品
-
Compatherm filler 9344 thermally conductive two-part addition cured compound from Nolato.
Compatherm filler key properties 9344
− 4 W/(mK) thermal conductivity
− Operating temperature -40 to +150˚ C
− Ultra-conforming
− Very good wetting
− Two-part material gives high mechanical stability after curing
1. Applications
The product is used to transfer heat from heat sources, such as components on a
PCB, to a heat sink. Compatherm filler 9344 has the ability to cover various gap
heights and complex geometries with a very low closure force. -
Compatherm Paste 9543 a high performance thin bondline thermal paste from Nolato
Nolato thermal paste 9543 is designed to provide efficient heat transfer for cooling of
modern electronics.Compatherm paste 9543 key properties
− 4.3 W/(mK) thermal conductivity
− Operating temperature -40 to +150˚ C
− Non curing
− Excellent long-time stability -
Nolato Series 1120 Silicone Sponge Rubber Sheets
Both silicone rubber solid and silicone rubber
sponge products (with either a coating of silicone
based pressure sensitive adhesive backing, for
maximum temperature advantage, or an acrylic
based pressure sensitive adhesive) provide the
greatest tack capability. -
Series 1140 Fluorosilicone Continuous Sheeting
Typical Industry Utilization
• Aircraft, Military & Commercial Aviation
• Petrochemical & Oil Refining
• Electronics -
Compatherm 9343 is a two part thermal filler from Nolato.
Features and benefits
Nolato integrated dispensing head solution.
4 W/mK thermal conductivity
Operating temperature -40 to +150˚ C
Ultra conforming before curing
Addition curing at room temperature
Very good wetting.
Two part material gives high mechanical stability after
curing
