Dowcoring 3165 high quality adhesive
and sealing housings, modules, and electrical leads. It is non-flowing, tack free, flame resistant, and has good green strength. 305 mL Cartridge
- 描述
- Global Tab
描述
Dow Corning 3165 Fast Tack RTV Adhesive Sealant Gray is a one component, room temperature curing, silicone adhesive that is used for assembling print wire boards, yokes, adding mechanical stability, and sealing housings, modules, and electrical leads. It is non-flowing, tack free, flame resistant, and has good green strength. 305 mL Cartridge
相关产品
-
Dow corning DOWSIL™ 3140 RTV Coating
- One-part no mixing required
- Good flowability, Able to flow, fill or self-leveling after dispensing
- Room temperature cure, no ovens required
- Faster in-line processing with optional heat acceleration
- No added solvents
- UL 94 V-1, IPC-CC-830 and MIL-A-46146 tested
- Can be considered for uses requiring added flame resistance, IPC or Mil Spec testing
- UL 746E / UL746C Recognized
- UV indicator for manual and automated inspection
-
Konishi G17 silica gel
Small west KONISHIG17 glue
Japan’s small west (KONISHI) silica gel: multi-purpose: suitable for metal, leather, plastic, wood, cloth, stone material and so on bond. Especially has the significant effect on the rubber adhesive. Powerful: more than 4 kn/m.
Room temperature quick-drying: stick at the beginning of 20 minutes, 24 hours of highest intensity; Colorless, transparent, and environmentally friendly adhesives. Synthetic solvent. -
threebond 1530silicone material
-
Dow corning DOWSIL™ 7091 Adhesive Sealant
Designed for applications which demand a strong but flexible bond, such as when
bonding materials with differing thermal expansion rates, e.g. glass to metal or glass to
plastic.
Unprimed adhesion to commonly used materials including enameled and painted steel,
aluminum, ceramic and glass as well as to certain plastics used in engineering
applications.
Used as a Formed-in-Place Gasket (FIPG) material. -
Dow corning DOWSIL™ 744 RTV Adhesive Sealant
Dow one-part moisture cure adhesives are generally cured at room temperature and in an
environment of 30 to 80 percent relative humidity eliminating the need for curing ovens and
the associated costs of energy and capital. Greater than 90 percent of full physical
properties should be attained within 24 to 72 hours and varies according to product. Faster
manufacturing throughput can be achieved since the adhesive and component can be
handled in much shorter times of about 10 to 120 minutes, depending on the adhesive
selected and the amount applied. These adhesives are not typically used in highly confined
spaces or where a deep section cure is required as they generally cure from the exposed
surface inward at a rate of 0.25 inch per seven days. Cure progresses from the outer
exposed surface and is dependent on the moisture in the air. Working time is generally a
few minutes to an hour for these products until a surface skin begins to form. Mild heat
below 60°C (140°F) may be used to increase through-put by accelerating the cure. Dow
silicone adhesives retain their original physical and electrical properties over a broad range
of operating conditions which enhance the reliability of and service life of devices. The
stable chemistry and versatile processing options of these adhesives offer benefits for a
variety of device assembly needs from increasing component safety and reliability, reducing
total cost or increasing the performance envelope of devices or modules. Underwriters
Laboratory (UL) 94 recognition is based on minimum thickness requirements. Please
consult the UL Online Certifications Directory for the most accurate certification information
