DOWSIL 3145 RTV MIL-A-46146 Adhesive/Sealant – Gray
DOWSIL 3145 RTV MIL-A-46146 Adhesive/Sealant – Gray is suitable for:
Sealing openings in modules and housings
Adding mechanical stability to individual components
Assembly of components on PWBs
Sealing in and around wired and electrical leads Yoke assembly
- 描述
- Global Tab
描述
Non-flowing Room temperature cure
High tensile strength and elongation
Enhanced thermal stability
MIL-A-46146 Group II/III, TY I No mixing required
RT cure, no ovens required
Faster in-line processing with optional heat acceleration Can be considered for uses with Mil Spec requirements
Can be considered for uses needing special high temperature stability
相关产品
-
Dow corning DOWSIL™ 795 Silicone Building Sealant
- Highly resistant to weather, UV and temperature extremes
- One-part, medium-modulus neutral-cure adhesive/sealant silicone material
- Supports glass and other panel materials under high wind load
- Weatherproofs substrates such as glass, aluminum, steel, painted metal, EIFS, granite & other stone, concrete, brick, plastic
- Ready to use as supplied with all-temperature gunnability, easy tooling and low-odor curing
-
DOWSIL 1-2620 Low VOC Conformal Coating version is supplied with a lower VOC content compared to that of the DOWSIL 1-2620 Dispersion and has equivalent Mil spec, IPC-CC-830 and UL recognitions.
RTV elastoplastic conformal coatings have firm, dry surfaces for better handling and
abrasion resistance after cure. Various viscosity versions facilitate different application
methods. They require atmospheric moisture to cure (no ovens) and their cure rates can be
accelerated by mild heat. Conformal coatings are materials applied in thin layers onto
printed circuits boards or other PCB system assembly substrates -
DOWSIL 3165 Fast Tack RTV Adhesive Sealant
One-part
• Polydimethylsiloxane adhesive
Application
Methods
• Automated or manual needle dispense systems
Applications • Sealing openings in modules and housings
• Adding mechanical stability to individual components
• Assembly of components on PWB/s
• Sealing in and around wired and electrical leads
• Yoke assembly -
Dowsil corNING SC102 ELECTRONIC IC chip thermal grease heat sink
A white, non – cured, non – flowing, heat – conducting compound. Designed to provide efficient heat transfer for cooling of computer power supplies and electronic modules used in automotive applications
-
Dow corning DOWSIL™ 340 Heat Sink Compound
Dow thermally conductive compounds are grease like silicone materials, heavily filled with heat-conductive metal oxides. This combination promotes high thermal conductivity, low
bleed and high-temperature stability. The compounds are designed to maintain a positive heat sink seal to improve heat transfer from the electrical device or PCB system assemblies
to the heat sink or chassis, thereby increasing the overall efficiency of the device. or PCB system assemblies are continually designed to deliver higher performance. Especially in the area of consumer devices, there is also a continual trend towards smaller, more compact designs. In combination these factors typically mean that more heat is generated in the device. Thermal management of PCB system assemblies is a primary concern of design engineers. A cooler device allows for more efficient operation and better reliability over the life of the device. As such, thermally conductive compounds play an integral role here. Thermally conductive materials act as a thermal “bridge” to remove heat from a heat source (device) to the ambient via a heat transfer media (i.e. heat sink). These materials have properties such as low thermal resistance, high thermal conductivity, and can achieve thin Bond Line Thicknesses (BLTs) which can help to improve the transfer of heat away from the device.
