pattex px4l
Suitable for metal, rubber, leather, fabric and other materials. Especially paste plywood, fibreboard, planing
Decorative panels (fire board), aluminum composite panels, glass fiberboard, plexiglass, hard plastic,
Rubber blocks. Wood: part of the plastic products before the proposed cohesion sticky. Not suitable for pasting polystyrene, plastic
Ethylene, polyethylene, polypropylene, mirrors and some artificial leather.
Araldite AV138/HV998 glue two component epoxy AB structure gemstone sealing glue
Method of use
1. Pretreatment: It is recommended to use acetone or isopropyl alcohol (for plastics) to clean the adhesive surface to remove oil stains, stains and dust.Araldite AV138M/HV998 cannot be used with low alcohol, gasoline or paint thinner.Mechanically sanded or chemically cleaned surfaces provide stronger, more durable bonds.
2. Sizing: This product can be evenly coated on the pretreated surface to be bonded with a spatula.AralditeAV138M/HV998 usually 0.05-0.10mm thick adhesive layer can be the maximum lap shear strength of the bond.Bonded parts should be fully and clamped immediately after applying adhesive.
LO-TECH 7102 Epoxy resin GLUE
To be potted products need to keep dry, clean; use check the A agent, observe whether there is settlement, and A agent to stir evenly; according to the ratio of the amount, and weighing accurate, please remember that the ratio is the weight ratio Non-volume ratio, A, B mixture after the need to fully stir evenly to avoid curing is not complete; stir even after the timely filling, and as far as possible in the use of time to use fully mixed glue; Gradually penetrate into the product gap, if necessary, please carry out the second filling; curing process, please keep the environment clean, so that impurities or dust into the uncured glue surface.