Henkel LOCTITE 242 Motor glue, single component thread locking adhesive, anaerobic adhesive
Product name: LOCTITE242
Product specifications: 50ml/250ml
Fluorescence: having fluorescence
Appearance (not cured): Blue liquid
Viscosity (mpa) s) : 1600
Tolerance temperature (℃): -55~150℃
Initial fixation time: 5-20 minutes
Curing method: anaerobic curing
Chemical type: methacrylate
Application Features: A threaded locking adhesive containing methacrylate that provides universal quality, medium strength, medium viscosity. For metal threads up to size M36.
- 描述
- Global Tab
描述
LOCTITE 242 is a medium strength, medium viscosity, methacrylate based thread locking adhesive offering universal quality. On steel, brass and stainless steel, the product offers fast initial setting times of 5, 15 and 20 minutes respectively. LOCTITE 242 is thixotypic to prevent migration after coating and is intended for fasteners that require normal removal using standard hand tools.
Product features
1. Moderate intensity
2. Medium viscosity
3. Quick initial time
4. Thixotropy reduces adhesive migration
相关产品
-
LOCTITE 263 designed for the permanent locking and sealing of threaded
LOCTITE
263 is particularly suited for heavy duty
applications such as studs into motor housings, nuts onto studs
in pump housings and other fasteners where high strength is required -
LOCTITE 480 rubber toughened adhesive with increased flexibility and peel strength along with enhanced resistance to shock.
LOCTITE 480 is a rubber toughened adhesive with
increased flexibility and peel strength along with enhanced
resistance to shock. -
LOCTITE271 designed for the permanent locking and sealing of threaded fasteners.
LOCTITE
271 designed for the permanent locking and
sealing of threaded fasteners. The product cures when
confined in the absence of air between close fitting metal
surfaces and prevents loosening and leakage from shock and
vibration. Typical applications include the locking and sealing
of large bolts and studs (up to M25 ).Specific Gravity 25 °C 1.1
Flash Point – See SDS
Viscosity, Brookfield – RVT, 25 °C, mPa·s (cP):
Spindle 1, speed 10 rpm, 400 to 600LMS -
Original Henkel LOCTTIE Loctite 190024 UV curing adhesive liquid optical UV shadow free glue
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.12
Viscosity, Brookfield – HBT, 25 °C, mPa·s (cP):
Spindle TB, speed 10 rpm, , Helipath 18,000 to 35,000LMS
TYPICAL CURING PERFORMANCE
LOCTITE®
DSP 190024™ can be cured by exposure to UV
and/or visible light of sufficient intensity. Surface cure is
enhanced by exposure to UV light in the 220 to 260 nm range.
Cure rate and ultimate depth of cure depend on light intensity,
spectral distribution of the light source, exposure time and light
transmittance of the substrate through which the light must
pass.
Fixture Time
UV fixture time is defined as the light exposure time
required to develop a shear strength of 0.1 N/mm².
UV Fixture Time, Glass microscope slides, seconds:
6 mW/cm², measured @ 365 nm ≤10LMS -
LOCTITE 510 cures when confined in the absence of air between close fitting metal surfaces
NSF International Registered to NSF Category P1 for use as a sealant where
there is no possibilty of food contact in and around food
processing areas. Note: This is a regional approval. Please
contact your local Technical Service Center for more
information and clarification.
