Henkel LOCTITE 7701 Medical grade oil removal acrylic instant dry adhesive accelerator surface treatment agent
Brand :LOCTITE/ LOCTITE
Model: 7701
Specification: 1.75 FL. OZ
Origin: China
Color: Transparent
Shelf life :24 months
Application: it is suitable for the assembly of medical equipment
- 描述
- Global Tab
描述
Product overview
Henkel Loctet 7701 prisms are used for polyolefin and other low energy surfaces, suitable for bonding with Loctet cyanoacrylate adhesives. Recommended only for hard-to-bond substrates including polyethylene, polypropylene, polytetrafluoroethylene and thermoplastic rubber materials. Not recommended when high peel strength is required.
Product parameters
Color: Transparent
Component: a single component
Flash: – 2 ° C
Specific gravity: 0.68
Spray: No
Table dry time: <30 seconds >
Viscosity: 1.25
Typical use: The LOCTITE 7701 is suitable for the assembly of disposable medical equipment.
相关产品
-
Loctai 3623 one component transparent medical grade UV curing adhesive UV glue
Use guide
1. The product is photosensitive. Store and operate away from sunlight, ultraviolet and artificial light.
2. The product shall be dispensed with dispensing equipment with black feeding pipe.
3. For best results, the surface of the bonded material should be clean and free of grease.
4. The curing speed depends on the intensity of the light source, the distance from the light source, the curing depth, the bonding gap and the transmittance of the material..
5. For temperature sensitive bases, such as thermoplastics, cooling is required.
6 crystalline and semi-crystalline thermoplastics contact liquid glue need to check whether there is the possibility of stress cracking.
7. Excessive uncured adhesives can be removed by organic solvents (e.g. acetone).
8. The adhesive shall be cooled before bearing any load.
-
LOCTITE EA E-120HP epoxy structural adhesive High strength metal plastic adhesive solvent resistant
- Product Name: LOCTITE EA E-120HP
Product specification: 50ml
Composition: Two components
Appearance (not cured): Amber
Viscosity (mpa.s): resin :41000~61000 curing agent :2000~4000
Tolerance temperature (℃): -55~120℃
Operation time: 120 minutes
Curing method: mixed room temperature curing
Chemical type: epoxy resin
Application characteristics: Two component industrial grade epoxy resin adhesive. It cures at room temperature to form a tough adhesive layer with excellent peel resistance and impact resistance.
- Product Name: LOCTITE EA E-120HP
-
LOCTITE SF 7455 used where increased cure speed of LOCTITE cyanoacrylate adhesives is required.
LOCTITE 7455 typical applications include
bonding dissimilar materials such as metals, glass or ceramics
and where fast fixturing is required between close fitting parts.LOCTITE 7455 typical applications include
bonding dissimilar materials such as metals, glass or ceramics
and where fast fixturing is required between close fitting parts. -
Loctite 3201 Light Cure Adhesive
Loctite® 3201™ is a nonfluorescing, high viscosity, UV/Visible light cure adhesive that forms very flexible joints with minimal streLoctite® 3201™ is a nonfluorescing, high viscosity, UV/Visible light cure adhesive that forms very flexible joints with minimal stress cracking. Ideal for bonding polycarbonate and other thermoplastics. ISO-10993 Biological Tested for medical device use.ss cracking. Ideal for bonding polycarbonate and other thermoplastics. ISO-10993 Biological Tested for medical device use.
-
LOCTITE 243 designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools
Prevail Torque 180°, ISO 10964, Pre-torqued to 5 N·m:
M10 black oxide bolts and mild steel
nuts
N·m 4
(lb·in) (35)
3/8 x 16 steel nuts and bolts N·m 3.5
(lb·in) (30)
Compressive Shear Strength, ISO 10123
Steel pins and collars N/mm² 7.6
(psi) (1,100)
Cured for 1 week 23°C
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m:
M10 zinc phosphate nuts and bolts N·m 26
(lb·in) (230)
M10 stainless steel bolts and nuts N·m 17
(lb·in) (150)
TYPICAL ENVIRONMENTAL RESISTANCE
Cured for 1 week 23°C
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m:
M10 zinc phosphate steel nuts and bolts
