Henkel LOCTITE M18 Metal loosening decontamination antirust bolt screw lubricant
Instructions
1.Shake the product can thoroughly before use.
2.Flip the attached metal straw up and spray at a distance of about 5-10cm with the metal straw onto area.
3.Repeat application twice or three times on rusted, corroded and seized parts and then knock the parts by a rubber hammer or sinilar tools lightly for best results.
4.Aiter use, flip the straw down and stored in cool and dry place.
- 描述
- Global Tab
描述
Product Features
1. Provide Lubrication, cleaning and rust prevention for automobiles or mechanical equipment;
2. Make the contacts of electronic products restored and the components cleaned;
3.Protect, maintarn and lubricate office-use,home-use, sports and leisure facilities, increase their service life.
4. Help the devices operate smoothly by reducing retardatory motion or noise;
5.Expel, eliminate and prevent water and moisture of various electrical devices.
6.Panetrate smoothly to deep inside area for lubrication and rust prevention.
相关产品
-
LOCTITE 495 general purpose cyanoacrylate instant adhesive
Loctite 495 is High thermal performance and for rapid bonding of plastics, rubbers and metal. LOCTITE 495 is a general purpose cyanoacrylate instant adhesive.
-
Loctite Series E-90FL, Epoxy Adhesive, Dual-Cartridge, 1.69 oz, Gray, 90 min Work Life
- Technical parameters of Loctite E-90FL:
Model number: loctite E-90FL
Color: Gray;
Viscosity @25°C, mPa.s(cP) 62000-81000;
Applicable time: 90 minutes;
Volume mixing ratio (resin: stearic agent) : 1:1;
Peel strength (piw) : 5-40;
Shear strength (psi*) : 1000-3000;
Glass conversion temperature (℃) : -5
- Technical parameters of Loctite E-90FL:
-
LOCTITE SF 7455 used where increased cure speed of LOCTITE cyanoacrylate adhesives is required.
LOCTITE 7455 typical applications include
bonding dissimilar materials such as metals, glass or ceramics
and where fast fixturing is required between close fitting parts.LOCTITE 7455 typical applications include
bonding dissimilar materials such as metals, glass or ceramics
and where fast fixturing is required between close fitting parts. -
LOCTITE 638 designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm
LOCTITE 638 is designed for the bonding of cylindrical
fitting parts, particularly where bond gaps can approach 0.25
mm and where maximum strength at room temperature is
requiredThe product cures when confined in the absence of air
between close fitting metal surfaces and prevents loosening
and leakage from shock and vibrationTypical applications
include locking bushings and sleeves into housings and on shaftsL -
LOCTITE 416 general purpose cyanoacrylate instant adhesive.
The rate of cure will depend on the bondline gap. Thin bond
lines result in high cure speeds, increasing the bond gap will
decrease the rate of cure.
