Henkel LOCTITESF 7200 gel remover 00 Metal gasket cleaner Universal cleaner
Brand: Henkel Loctite
Product name: gasket remover
Specifications: 400ml
Application: Component cleaning
Key parameter: solvent type
- 描述
- Global Tab
描述
Suitable for removing gaskets from aluminum or other soft metal flanges, because excessive scraping can easily cause flange surface damage; It can also be used to remove adhesives, accumulated grease, carbon deposits, dry oil stains, paints and varnishes from metal flanges or surfaces.
相关产品
-
LOCTITE 416 general purpose cyanoacrylate instant adhesive.
The rate of cure will depend on the bondline gap. Thin bond
lines result in high cure speeds, increasing the bond gap will
decrease the rate of cure. -
Loctite 9455 colorless special adhesive epoxy resin adhesive
Loctite 9455 epoxy adhesive is specially developed for a variety of special adhesives. Widely used where tensile, shear and peel strength is required plus resistance to shock, pressure and vibration. When it is in contact with the activator, the material quickly cures into a weather-resistant adhesive layer at room temperature without mixing
-
LOCTITE EA E-120HP epoxy structural adhesive High strength metal plastic adhesive solvent resistant
- Product Name: LOCTITE EA E-120HP
Product specification: 50ml
Composition: Two components
Appearance (not cured): Amber
Viscosity (mpa.s): resin :41000~61000 curing agent :2000~4000
Tolerance temperature (℃): -55~120℃
Operation time: 120 minutes
Curing method: mixed room temperature curing
Chemical type: epoxy resin
Application characteristics: Two component industrial grade epoxy resin adhesive. It cures at room temperature to form a tough adhesive layer with excellent peel resistance and impact resistance.
- Product Name: LOCTITE EA E-120HP
-
LOCTITE 243 designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools
Prevail Torque 180°, ISO 10964, Pre-torqued to 5 N·m:
M10 black oxide bolts and mild steel
nuts
N·m 4
(lb·in) (35)
3/8 x 16 steel nuts and bolts N·m 3.5
(lb·in) (30)
Compressive Shear Strength, ISO 10123
Steel pins and collars N/mm² 7.6
(psi) (1,100)
Cured for 1 week 23°C
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m:
M10 zinc phosphate nuts and bolts N·m 26
(lb·in) (230)
M10 stainless steel bolts and nuts N·m 17
(lb·in) (150)
TYPICAL ENVIRONMENTAL RESISTANCE
Cured for 1 week 23°C
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m:
M10 zinc phosphate steel nuts and bolts -
LOCTITE 609 designed for the bonding of cylindrical fitting parts
LOCTITE 609 is tested to the lot requirements of Military
Specification Mil-R-46082B. Note: This is a regional approval.
Please contact your local Technical Service Center for more
information and clarification.
