LOCTITE 232 Motor rotor glue Motor magnetic steel bonding adhesive cylinder holding anaerobic adhesive
LOCTITE 232 Methyl methacrylate acrylate fixation compound. Its lubricating properties can facilitate the assembly of high interference or high torque materials. LOCTITE® 232 Brown, opaque acrylic methacrylate is an acrylic acid compliant curable. Its lubricating properties can facilitate the assembly of high interference or high torque materials. It prevents damage during disassembly and eliminates corrosion at the interface due to higher disassembly forces. The typical application of this product is high torque thread assembly and heavy fit.
- 描述
- Global Tab
描述
LOCTITE 232 Brown, opaque acrylic nail acrylic conforming to the cure. Its lubricating properties can facilitate the assembly of high interference or high torque materials. It prevents damage during disassembly and eliminates corrosion at the interface due to higher disassembly forces. The typical application of this product is high torque thread assembly and heavy fit.
Product features
1. Lubrication properties assist in assembly under high interference or torque conditions
2. Avoid damage during disassembly
3. In addition to the corrosion caused by higher disassembly force at the interface
相关产品
-
LOCTITE 609 designed for the bonding of cylindrical fitting parts
LOCTITE 609 is tested to the lot requirements of Military
Specification Mil-R-46082B. Note: This is a regional approval.
Please contact your local Technical Service Center for more
information and clarification. -
LOCTITE STYCAST US 5544 fast gelling, flexible, flame retardant, mineral-filled, polyurethane compound.
Not for product specifications
The technical data contained herein are intended as reference only.
Please contact your local quality department for assistance and
recommendations on specifications for this product -
LOCTmtedITE 518 single component, iu anam strengh,es weroant wurhen bic shich cealconfined in the absence of air between close fitting metal surfaces.
LOCTITE 518 provides robust curing
performance. It not only works on active metals (e.g. mild steel)
but also on passive substrates such as aluminum with a low
copper content. The product offers gap performance to 0.25
mm (0.01 in) and contamination tolerance. It cures in the
presence of minor surface contaminations from various oils,
such as cutting, lubrication, anti-corrosion and protection fluids
and cleaners containing surfactants and corrosion inhibitors. -
LOCTITE SF 7452 increased cure speed of LOCTITE cyanoacrylate adhesives
- Cures excess adhesive
- Provides excellent cosmetic appearance avoiding the white discoloration of instant adhesives
- Not recommended on plastics prone to stress cracking
-
Original Henkel LOCTTIE Loctite 190024 UV curing adhesive liquid optical UV shadow free glue
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.12
Viscosity, Brookfield – HBT, 25 °C, mPa·s (cP):
Spindle TB, speed 10 rpm, , Helipath 18,000 to 35,000LMS
TYPICAL CURING PERFORMANCE
LOCTITE®
DSP 190024™ can be cured by exposure to UV
and/or visible light of sufficient intensity. Surface cure is
enhanced by exposure to UV light in the 220 to 260 nm range.
Cure rate and ultimate depth of cure depend on light intensity,
spectral distribution of the light source, exposure time and light
transmittance of the substrate through which the light must
pass.
Fixture Time
UV fixture time is defined as the light exposure time
required to develop a shear strength of 0.1 N/mm².
UV Fixture Time, Glass microscope slides, seconds:
6 mW/cm², measured @ 365 nm ≤10LMS
