LOCTITE 382 Instant glue Adhesive seal metal rubber transparent quick drying glue universal gel
Brand :LOCTITE/ LOCTITE
Model :382 [Specification] : 20G [Origin] : China
Features: colorless, transparent, fast curing, low odor, low whitening
Applications: specially formulated for electronic applications, typical applications include wire clamp in coil form; Tamper-proof adjustable component; Install brackets, edge guides and stiffeners for the circuit board.
- 描述
- Global Tab
描述
LOCTITE 382 is a clear, colorless, universal ethyl instant dry adhesive with initial setting time of 20-40 seconds. It is suitable for rubber and metals, and can be used in combination with Primer LOCTITE SF 770 or LOCTITE SF 7239 for plastics and polyolefin.
Product features
1. General-purpose gel
2. Suitable for rubber and metal
3. Initial fixation time is 20-40 seconds
4. Used in combination with Primer LOCTITE 770 or LOCTITE 7239 for plastics and polyolefin
LOCTITE 382 is a single-part, fast-curing, high-viscosity cyanoacrylate adhesive formulated specifically for electronic applications. LOCTITE 382 is designed for use with the TAKPAK accelerator to achieve instant solidification of electronic components. Typical applications include wire clamp in coil form; Tamper-proof adjustable component; Install brackets, edge guides and stiffeners for the circuit board.
相关产品
-
LOCTITE SF 7455 used where increased cure speed of LOCTITE cyanoacrylate adhesives is required.
LOCTITE 7455 typical applications include
bonding dissimilar materials such as metals, glass or ceramics
and where fast fixturing is required between close fitting parts.LOCTITE 7455 typical applications include
bonding dissimilar materials such as metals, glass or ceramics
and where fast fixturing is required between close fitting parts. -
Loctai 3623 one component transparent medical grade UV curing adhesive UV glue
Use guide
1. The product is photosensitive. Store and operate away from sunlight, ultraviolet and artificial light.
2. The product shall be dispensed with dispensing equipment with black feeding pipe.
3. For best results, the surface of the bonded material should be clean and free of grease.
4. The curing speed depends on the intensity of the light source, the distance from the light source, the curing depth, the bonding gap and the transmittance of the material..
5. For temperature sensitive bases, such as thermoplastics, cooling is required.
6 crystalline and semi-crystalline thermoplastics contact liquid glue need to check whether there is the possibility of stress cracking.
7. Excessive uncured adhesives can be removed by organic solvents (e.g. acetone).
8. The adhesive shall be cooled before bearing any load.
-
LOCTITE SF 7452 increased cure speed of LOCTITE cyanoacrylate adhesives
- Cures excess adhesive
- Provides excellent cosmetic appearance avoiding the white discoloration of instant adhesives
- Not recommended on plastics prone to stress cracking
-
Henkel LOCTITE 460 Instant adhesive Low bleaching low odor quick drying adhesive Metal plastic rubber universal
The rate of cure will depend on the ambient relative
humidity. The best results are achieved when the relative
humidity in the working environment is 40% to 60% at 22°C.
Lower humidity leads to slower cure. Higher humidity
accelerates it, but may impair the final strength of the bond. -
Loctite Series E-90FL, Epoxy Adhesive, Dual-Cartridge, 1.69 oz, Gray, 90 min Work Life
- Technical parameters of Loctite E-90FL:
Model number: loctite E-90FL
Color: Gray;
Viscosity @25°C, mPa.s(cP) 62000-81000;
Applicable time: 90 minutes;
Volume mixing ratio (resin: stearic agent) : 1:1;
Peel strength (piw) : 5-40;
Shear strength (psi*) : 1000-3000;
Glass conversion temperature (℃) : -5
- Technical parameters of Loctite E-90FL:
