Henkel LOCTITE 403 Quick Drying Adhesive Low odor low bleaching High strength quick drying adhesive multi-purpose active adhesive
LOCTITE 403 is a medium viscosity, low odor, low albino, alkoxyethyl transient dry adhesive suitable for use in difficult vapor control situations. It can quickly bond to a variety of materials, including metals, plastics and elastomers. Especially suitable for bonding porous or absorbent materials.
Product Features
1. Low odor, suitable for situations where steam control is essential
2. Low bleaching, suitable for the manufacture of cosmetics
3. Colorless and transparent
4. Very suitable for porous substrates
- 描述
- Global Tab
描述
LOCTITE 403 has low odor and low blooming properties
and is particularly suitable for applications where vapor control
is difficult. The product provides rapid bonding of a wide range
of materials, including metals, plastics and elastomers.
LOCTITE 403 is particularly suited for bonding porous or
absorbent materials such as wood, paper, leather and fabric .
相关产品
-
LOCTITE 416 general purpose ethyl-based instant adhesive
LOCTITE 416 is a transparent, colourless, high viscosity, general purpose ethyl-based instant adhesive. Suitable for metals, rubbers and plastic, it is also suitable for polyolefins in combination with Primer LOCTITE 770 or LOCTITE 7239. It has a fixture time of 20 – 40 secs.
-
LOCTITE AA 3106 UV curing adhesive UV curing acrylate adhesive
LOCTITE® AA 3106™ is primarily designed for bonding rigid or
flexible PVC to polycarbonate where large gap filling
capabilities and flexible joints are desired. The product has
shown excellent adhesion to a wide variety of substrates
including glass, many plastics and most metals. The thixotropic
nature of LOCTITE® AA 3106™ reduces the migration of liquid
product after application to the substrate. -
LOCTITE 495 general purpose cyanoacrylate instant adhesive
Loctite 495 is High thermal performance and for rapid bonding of plastics, rubbers and metal. LOCTITE 495 is a general purpose cyanoacrylate instant adhesive.
-
Loctai 3623 one component transparent medical grade UV curing adhesive UV glue
Use guide
1. The product is photosensitive. Store and operate away from sunlight, ultraviolet and artificial light.
2. The product shall be dispensed with dispensing equipment with black feeding pipe.
3. For best results, the surface of the bonded material should be clean and free of grease.
4. The curing speed depends on the intensity of the light source, the distance from the light source, the curing depth, the bonding gap and the transmittance of the material..
5. For temperature sensitive bases, such as thermoplastics, cooling is required.
6 crystalline and semi-crystalline thermoplastics contact liquid glue need to check whether there is the possibility of stress cracking.
7. Excessive uncured adhesives can be removed by organic solvents (e.g. acetone).
8. The adhesive shall be cooled before bearing any load.
-
Henkel LOCTITE 460 Instant adhesive Low bleaching low odor quick drying adhesive Metal plastic rubber universal
The rate of cure will depend on the ambient relative
humidity. The best results are achieved when the relative
humidity in the working environment is 40% to 60% at 22°C.
Lower humidity leads to slower cure. Higher humidity
accelerates it, but may impair the final strength of the bond.
