LOCTITE 430 Quick-drying Glue Universal low-albino low-odor acrylate Instant drying glue
Brand: LOCTITE
Model: 430
Specification: 20 g
Origin: China
Shelf life :24 months
Component: Single component
Properties: Colorless and transparent, low viscosity
Application: Bonding metal, wood, etc
- 描述
- Global Tab
描述
LOCTITE430 is a clear, low viscosity, colorless liquid general purpose adhesive of methyl acrylate, especially suitable for bonding metal substrates. Use and application Surface cleaning For good bonding the surface to be bonded must be clean and free of rust inhibitors, release agents, lipids, oils and other contaminants. Used for bonding rubber, metal and plastic parts, can fill 0.10mm gap, can be used with Loctite 7542 accelerator.
Product features
Especially suitable for bonding metal substrates
Low viscosity
Passed AA-3097 Commercial Article Description (regional standard)
相关产品
-
Henkel LOCTITE 221 one component low viscosity acrylic anaerobic glue thread locking agent
Brand: LOCTITE
Model: 221
Specification: 50 ml
Origin: China
Shelf life :24 months
Curing mode: anaerobic curing
Characteristics: low strength, low viscosity
Application: Thread locking and sealing applications -
LOCTITE271 designed for the permanent locking and sealing of threaded fasteners.
LOCTITE
271 designed for the permanent locking and
sealing of threaded fasteners. The product cures when
confined in the absence of air between close fitting metal
surfaces and prevents loosening and leakage from shock and
vibration. Typical applications include the locking and sealing
of large bolts and studs (up to M25 ).Specific Gravity 25 °C 1.1
Flash Point – See SDS
Viscosity, Brookfield – RVT, 25 °C, mPa·s (cP):
Spindle 1, speed 10 rpm, 400 to 600LMS -
LOCTITE 510 cures when confined in the absence of air between close fitting metal surfaces
NSF International Registered to NSF Category P1 for use as a sealant where
there is no possibilty of food contact in and around food
processing areas. Note: This is a regional approval. Please
contact your local Technical Service Center for more
information and clarification. -
LOCTITE 420 Quick-drying Adhesive for high and low temperature resistant metal plastics for general purpose
LOCTITE 420 is a clear, colorless, all-purpose adhesive containing ethyl capillarity. Applicable to metals, rubber and plastics, Primer LOCTITE SF 770 or LOCTITE SF 7239 can also be used in combination with polyolefin. The initial fixation time is 5-20 seconds.
Product Features
1. Fast curing between two surfaces
2. Ideal products for bonding small and medium sized parts
3. It has good adhesion to most substrates
4. Suitable for metal, rubber and plastic
5. The initial fixation time is 5-20 seconds
6. Capillarity
7. No solvent
-
Loctite 290 motor magnetic steel magnet glue thread locking anaerobic adhesive engine motor adhesive
LOCTITE® 290 is a liquid medium/high strength thread locking agent used to secure and seal threaded fasteners. The product penetrates between meshing threads through low viscosity and capillary penetration without disassembly before coating. This product is solidified between tightly matched metal surfaces and isolated from air to prevent loosening and leakage caused by shock and vibration. The product can also be used to fill microholes in welded, cast or powder metallurgy parts.
