LOCTITE EA 0151 clear two-component epoxy having optical clarity when used in small quantities

LOCTITE EA 0151 clear two-component epoxy having optical clarity when used in small quantities

Application: Bonding surfaces should be clean and dry. Once
the adhesive is applied, the bonded parts should be held in
contact until the part has developed handling strength. It is not
necessary to clamp the parts unless movement during cure is
likely

分类: ,
  • 描述
  • Global Tab

描述

Cure: Complete cure is obtained after three days at room
temperature. After 24 hours, approximately 90% of full cure
properties are attained. Hysol 0151 will achieve handling
strength in 6-8 hours at 77°F (note: this can vary with different
bond configurations). Hysol 0151 can also be completely cured
with heat such as: 2 hours at 140°F; 1 hour at 180°F; or 30
minutes at 250°F. Heat cures can be modified to achieve a
desired degree of cure from handling strength to full cure.

 

Contact Us