LOCTITE EA E-00NS Glue Industrial grade epoxy adhesive two component AB structure adhesive
Brand :LOCTITE/ LOCTITE
Model: EAE – 00 ns
Specification: 50 ml
Origin: China
Shelf life :24 months
Component: two components
Properties: thixotropic, high temperature resistance
Application: metal, plastic, wood, etc
- 描述
- Global Tab
描述
LOCTITE EA E-OONS is a fast setting, non-sagging thixotropic, industrial grade epoxy adhesive. Once mixed, the two component epoxy cures at room temperature to form a translucent, rigid, machineable bondline. When fully cured, the epoxy is resistant to a wide range of chemicals and solvents.and acts as an excellent electrical insulator.Typicalapplications include bonding plastic, metal, glass, wood, ceramic, rubber, and masonry materials.lts non-sagging formula is especially suited for use on vertical surfaces to avoid run-off, as well as staking fillet bonds and general industrial repairs. Designed for use in component assembly, appliances, electronics.&fiber optics.
相关产品
-
LOCTITE EA E-120HP epoxy structural adhesive High strength metal plastic adhesive solvent resistant
- Product Name: LOCTITE EA E-120HP
Product specification: 50ml
Composition: Two components
Appearance (not cured): Amber
Viscosity (mpa.s): resin :41000~61000 curing agent :2000~4000
Tolerance temperature (℃): -55~120℃
Operation time: 120 minutes
Curing method: mixed room temperature curing
Chemical type: epoxy resin
Application characteristics: Two component industrial grade epoxy resin adhesive. It cures at room temperature to form a tough adhesive layer with excellent peel resistance and impact resistance.
- Product Name: LOCTITE EA E-120HP
-
LOCTITE AA 3106 UV curing adhesive UV curing acrylate adhesive
LOCTITE® AA 3106™ is primarily designed for bonding rigid or
flexible PVC to polycarbonate where large gap filling
capabilities and flexible joints are desired. The product has
shown excellent adhesion to a wide variety of substrates
including glass, many plastics and most metals. The thixotropic
nature of LOCTITE® AA 3106™ reduces the migration of liquid
product after application to the substrate. -
Henkel LOCTITE M18 Metal loosening decontamination antirust bolt screw lubricant
Instructions
1.Shake the product can thoroughly before use.
2.Flip the attached metal straw up and spray at a distance of about 5-10cm with the metal straw onto area.
3.Repeat application twice or three times on rusted, corroded and seized parts and then knock the parts by a rubber hammer or sinilar tools lightly for best results.
4.Aiter use, flip the straw down and stored in cool and dry place.
-
LOCTITE EA E-20HP epoxy AB structural adhesive off-white industrial grade universal glue
Brand: LOCTITE
Model: EA E-20HP
Specification :50ml
Shelf life :24 months
Curing method: room temperature curing
Characteristics: Medium viscosity, resistance to stripping
Application: Bonding metal, plastic, etc -
Loctai 3623 one component transparent medical grade UV curing adhesive UV glue
Use guide
1. The product is photosensitive. Store and operate away from sunlight, ultraviolet and artificial light.
2. The product shall be dispensed with dispensing equipment with black feeding pipe.
3. For best results, the surface of the bonded material should be clean and free of grease.
4. The curing speed depends on the intensity of the light source, the distance from the light source, the curing depth, the bonding gap and the transmittance of the material..
5. For temperature sensitive bases, such as thermoplastics, cooling is required.
6 crystalline and semi-crystalline thermoplastics contact liquid glue need to check whether there is the possibility of stress cracking.
7. Excessive uncured adhesives can be removed by organic solvents (e.g. acetone).
8. The adhesive shall be cooled before bearing any load.
