LOCTITE SI587 Flat sealant Seal silicone rubber thixoxime silicone paste engine sealant
LOCTITE SI 587 is a metallic blue, thixotropic silicone paste for plant maintenance and flat seal and sealing applications for Oems of all sizes. As a field formed gasket/sealant, it is designed to provide superior performance in typical automotive flat seal applications. The product is typically used in applications where the maximum temperature is +500 °F(+260 °C).
- 描述
- Global Tab
描述
Product characteristics
1. Excellent resistance to automobile engine oil performance, can stick a variety of substrates
2. Excellent adhesive for bonding and repairing prefabricated silicon gaskets
3. Thixotropic type
4. It is used in the application where the maximum temperature is 260℃
5. The bearing capacity and damping characteristics of the bonding area are improved
相关产品
-
Henkel LOCTITE 460 Instant adhesive Low bleaching low odor quick drying adhesive Metal plastic rubber universal
The rate of cure will depend on the ambient relative
humidity. The best results are achieved when the relative
humidity in the working environment is 40% to 60% at 22°C.
Lower humidity leads to slower cure. Higher humidity
accelerates it, but may impair the final strength of the bond. -
LOCTITE SF 7452 increased cure speed of LOCTITE cyanoacrylate adhesives
- Cures excess adhesive
- Provides excellent cosmetic appearance avoiding the white discoloration of instant adhesives
- Not recommended on plastics prone to stress cracking
-
LOCTITE 480 rubber toughened adhesive with increased flexibility and peel strength along with enhanced resistance to shock.
LOCTITE 480 is a rubber toughened adhesive with
increased flexibility and peel strength along with enhanced
resistance to shock. -
Loctai 3623 one component transparent medical grade UV curing adhesive UV glue
Use guide
1. The product is photosensitive. Store and operate away from sunlight, ultraviolet and artificial light.
2. The product shall be dispensed with dispensing equipment with black feeding pipe.
3. For best results, the surface of the bonded material should be clean and free of grease.
4. The curing speed depends on the intensity of the light source, the distance from the light source, the curing depth, the bonding gap and the transmittance of the material..
5. For temperature sensitive bases, such as thermoplastics, cooling is required.
6 crystalline and semi-crystalline thermoplastics contact liquid glue need to check whether there is the possibility of stress cracking.
7. Excessive uncured adhesives can be removed by organic solvents (e.g. acetone).
8. The adhesive shall be cooled before bearing any load.
-
LOCTITE 638 designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm
LOCTITE 638 is designed for the bonding of cylindrical
fitting parts, particularly where bond gaps can approach 0.25
mm and where maximum strength at room temperature is
requiredThe product cures when confined in the absence of air
between close fitting metal surfaces and prevents loosening
and leakage from shock and vibrationTypical applications
include locking bushings and sleeves into housings and on shaftsL
