METAFLUX 70-05scale inhibitor corrosion inhibitor
Product Description: The 70-05 series is a special rust-removing solvent for fastened stuck bolts. It is an efficient “liquid wrench” that can penetrate into oil, grease and carbonized oil. A few minutes will be able to loosen a variety of serious corrosion or stuck bolt parts, and can quickly remove the various due to freezing shrinkage, corrosion and burr caused by the phenomenon of screw stuck. Product viscosity below water and penetration is stronger than the traditional stripping oil, does not contain any acidic substances (especially phosphoric acid), does not contain any grease or oily substances, the composition of non-toxic side effects. Through the cooling shrinkage to rust the loose bolts, the treated place 10 to 15 minutes after the automatic decomposition, will not produce fisheye effect. The treated surface can be sprayed after 15 minutes
- 描述
- Global Tab
描述
There is a “liquid wrench,” said. Permeable spray, suitable for all rusty interface parts.
The use of the product, can make too tight parts and rusty parts quickly loosened
The product is permeable, can penetrate rust and grease. No grease
After ten minutes, the spray naturally evaporates without any residue
no acid, no corrosion of metal
The surface treated with this product can be painted after 15 minutes
Product Description: The 70-05 series is a special rust-removing solvent for fastened stuck bolts. It is an efficient “liquid wrench” that can penetrate into oil, grease and carbonized oil. A few minutes will be able to loosen a variety of serious corrosion or stuck bolt parts, and can quickly remove the various due to freezing shrinkage, corrosion and burr caused by the phenomenon of screw stuck. Product viscosity below water and penetration is stronger than the traditional stripping oil, does not contain any acidic substances (especially phosphoric acid), does not contain any grease or oily substances, the composition of non-toxic side effects. Through the cooling shrinkage to rust the loose bolts, the treated place 10 to 15 minutes after the automatic decomposition, will not produce fisheye effect. The treated surface can be sprayed after 15 minutes
Get free sample or more information , please contact me with my email: jenny@fuji-hk.cn . thank you .
相关产品
-
supply Metaflux 70-34 rust protection agent spray paint protective film
70-34 rust protection agent technical parameters
Use range
Vehicles, trucks, engineering vehicles, other machinery and equipment of the anti-corrosion maintenance;
A variety of metal structures on-site anti-corrosion maintenance;
Ship, rail industry, anti-corrosion maintenance.
Instructions
Before brushing, the need to remove the surface of the dust, oil, grease, wax, silicon and other dirt; can be used in the corrosion of the metal surface, need to remove the rust can be (st2 rust level).
Precautions
For outdoor use, you need another brush finish to prevent the coating from aging.
All coatings can be used as topcoats, overcoats, and are recommended for trial compatibility, especially coatings with high solvent content or aggressive solvents.
-
Metaflux 70-19 protective film spray circuit board three anti-paint
Color: colorless and transparent
Temperature: -40 ° C to 200 ° C
Breakdown voltage: 12Kv
30 square meters per can
-
metaflux70-08 Super Degrip Spray rust inhibitor
Virtue first Metaflux70-08 strongly loose antirust agent product specification: 400 ml/jar contains specialized development of antirust additive, can dissolve and loose rust, can solve the problem on most of the daily maintenance, the smudgy parts, severe corrosion effect is ideal. L can dissolve and loose rust stain l due to the concentrated injection, injection loss Can clear the tight rust and corrosion on the parts. Particularly suitable for bolted joints, bolts of l valve and pipeline can infiltrate into extremely difficult to penetrate into place No residue sediment will not affect the original paint l l as long as pay attention to safety operation distance, onto the operation of machinery, there will not be any danger The powerful loose antirust agent be the same
-
Metaflux 70-40 zinc thermal lead polishing Zinc paste
product manual:
Gray epoxy, suitable for long-term protection of metal surfaces. Manufactured in accordance with European specifications DIN50.976 / 1980. Zinc powder purity of 98.5% to 99%, surface dry zinc content of 96%. Can be reliably adhered to all metal surface .20 ℃ after 10 minutes after the hand touch, the full curing time of 80 ℃ for 24 hours; outer drying time of 20 ℃ 60 to 120 minutes. Dry after the cracks will not produce a brushing thickness of 150μm. Dry after dull and dull, can withstand temperature 800 ℃, dry after the excellent conductivity. -
Metaflux 70-45 Cutting-Spray detergent liquid
Zinc Spray 70-45
Cold galvanized spray, are at room temperature surface treatment, different from the hot galvanized, but with the same hot cathode galvanized anti-rust effect.
Zinc spray is a major technological breakthrough for the Metaflux Swiss plant in 1975. For the first time in the world, high-purity, high-content, ultra-small particles of zinc are sprayed through aerosol cans to form metallic and cathodic zinc Layer, and obtained a patent certificate.
