The metal surface is not sensitive instant dry glue
The surface is not sensitive
Universal type, medium viscosity. Used for bonding porous, acid and absorptive materials.
Main adhesive backing material: leather metal expect rubber wood paper, etc.
Color: colorless to straw color
Type: ethyl
Get free sample or more information , please contact me with my email: jenny@fuji-hk.cn . thank you .
- 描述
- Global Tab
描述
The surface is not sensitive
Universal type, medium viscosity. Used for bonding porous, acid and absorptive materials.
Main adhesive backing material: leather metal expect rubber wood paper, etc.
Color: colorless to straw color
Type: ethyl
Get free sample or more information , please contact me with my email: jenny@fuji-hk.cn . thank you .
相关产品
-
LOCTITE 263 designed for the permanent locking and sealing of threaded
LOCTITE
263 is particularly suited for heavy duty
applications such as studs into motor housings, nuts onto studs
in pump housings and other fasteners where high strength is required -
LOCTITE 510 cures when confined in the absence of air between close fitting metal surfaces
NSF International Registered to NSF Category P1 for use as a sealant where
there is no possibilty of food contact in and around food
processing areas. Note: This is a regional approval. Please
contact your local Technical Service Center for more
information and clarification. -
LOCTITE 420 Quick-drying Adhesive for high and low temperature resistant metal plastics for general purpose
LOCTITE 420 is a clear, colorless, all-purpose adhesive containing ethyl capillarity. Applicable to metals, rubber and plastics, Primer LOCTITE SF 770 or LOCTITE SF 7239 can also be used in combination with polyolefin. The initial fixation time is 5-20 seconds.
Product Features
1. Fast curing between two surfaces
2. Ideal products for bonding small and medium sized parts
3. It has good adhesion to most substrates
4. Suitable for metal, rubber and plastic
5. The initial fixation time is 5-20 seconds
6. Capillarity
7. No solvent
-
Henkel LOCTITE 460 Instant adhesive Low bleaching low odor quick drying adhesive Metal plastic rubber universal
The rate of cure will depend on the ambient relative
humidity. The best results are achieved when the relative
humidity in the working environment is 40% to 60% at 22°C.
Lower humidity leads to slower cure. Higher humidity
accelerates it, but may impair the final strength of the bond. -
LOCTITE 243 designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools
Prevail Torque 180°, ISO 10964, Pre-torqued to 5 N·m:
M10 black oxide bolts and mild steel
nuts
N·m 4
(lb·in) (35)
3/8 x 16 steel nuts and bolts N·m 3.5
(lb·in) (30)
Compressive Shear Strength, ISO 10123
Steel pins and collars N/mm² 7.6
(psi) (1,100)
Cured for 1 week 23°C
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m:
M10 zinc phosphate nuts and bolts N·m 26
(lb·in) (230)
M10 stainless steel bolts and nuts N·m 17
(lb·in) (150)
TYPICAL ENVIRONMENTAL RESISTANCE
Cured for 1 week 23°C
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m:
M10 zinc phosphate steel nuts and bolts
